465301
73
Zoom out
Zoom in
Previous page
1/80
Next page
73
English
Troubleshooting
Apparent faults or malfunctions may be easily resolved. Before calling for service, check the table
below for symptoms that match yours.
Symptoms Solution Ref. page
Ampli er/Speakers
There is no sound. Check that the system is connected properly, as
described in Connecting the System”.
Increase the volume.
Cancel the MUTE setting.
If there are headphones plugged into the main unit,
unplug them.
z
z
z
z
10 - 13
20
20
13
The
[STANDBY/TIMER]
indicator is  ashing red
and there is no sound.
One of the speaker cords is short-circuited. Unplug the
power cord and then reconnect the speaker cord.
There may be an internal problem. Turn o the power
to the main unit, unplug the power cord and request
repairs.
z
z
There is no sound
from the headphones.
Check that the headphone plug is inserted correctly.
Increase the volume.
Cancel the MUTE setting.
z
z
z
13
20
20
There is no sound from
“D-IN”.
Check that the system is connected properly, as
described in Connecting the System”.
Check whether “PCM” is selected as the digital audio
output setting on the connected component.
z
z
13
There is no sound from
one of the speakers.
Check that the system is connected properly, as
described in Connecting the System”.
Adjust the balance.
z
z
10
60
There is a booming sound
when I select PHONO as
the input source.
Insert the audio cord plugs securely into the [PHONO IN]
jacks.
Connect the signal earth wire to the [M] terminal.
z
z
12
12
The clock display is
ashing.
Set the time as described in “Setting the Time.z 69
The timer does not
work.
Set the time as described in “Setting the Time.
Set a start time and end time for the program timer.
z
z
69
63
I can’t get reception
from a radio station.
Connect the antennas.
Select the broadcast band (AM or FM).
Tune the radio to the frequency of the desired station.
z
z
z
10
36
36
There is interference
(noise).
Install an outdoor antenna away from the road.
Turn o any electrical appliances that may be causing
interference.
Move the system away from the TV.
z
z
z
I have used Auto Memory
and pressed the [P.CALL]
key, but I still can’t get
radio reception.
Run Auto Memory again.
Manually preset stations with frequencies that you can
receive.
z
z
38
39
Tuner
Symptoms Solution Ref. page
B60-5697-00.indb 73B60-5697-00.indb 73 2007/08/31 15:42:182007/08/31 15:42:18
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood R-K711 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood R-K711 in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info