490199
6
Zoom out
Zoom in
Previous page
1/162
Next page
speed switch
These are a guide only and will vary depending upon the quantity of mix in
t
he bowl and the ingredients being mixed.
b
eater
creaming fat and sugar start on min gradually increasing to a higher
s
peed
b
eating eggs into creamed mixtures use a medium to high speed
folding in flour, fruit etc use a low to medium speed
all in one cakes start on a low speed gradually increasing
t
o a higher speed
rubbing fat into flour use a low to medium speed
whisk
G
radually increase to maximum
d
ough hook
U
se a low to medium speed
maximum capacities
s
hortcrust pastry 450g flour weight
sponge cake (one stage mix) 1.6 Kg total mix
f
ruit cake mix 1.8 Kg total mix
b
read dough 500g flour weight
egg whites 8
electronic speed sensor control
Your mixer is fitted with an electronic speed sensor control that is designed
t
o maintain the speed under different load conditions, such as when
k
neading bread dough or when eggs are added to a cake mix. You may
therefore hear some variation in speed during the operation as the mixer
adjusts to the load and speed selected - this is normal.
to fit and use the splashguard
1 Fit the bowl into the base and add the ingredients.
2 Fit the tool then lower the mixer head
3 Fit the splashguard onto the bowl by sliding the cut away section around the
mixer head .
4 To remove the splashguard reverse the above procedure.
During mixing, ingredients can be added directly to the bowl via the chute.
care and cleaning
Always switch off and unplug before cleaning.
power unit
Wipe with a damp cloth, then dry.
Never use abrasives or immerse in water.
bowl, tools, splashguard, removable guard on dough hook
Wash by hand, then dry thoroughly or wash in the dishwasher.
Never use a wire brush, steel wool or bleach to clean your stainless steel
bowl. Use vinegar to remove limescale.
Keep away from heat (cooker tops, ovens, microwaves).
Blenders AT282 and AT283 (if supplied)
Use the blender for soups, drinks, pâtés, mayonnaise, breadcrumbs, biscuit
c
rumbs, chopping nuts and crushing ice.
safety
L
iquids should be allowed to cool to room temperature before blending.
D
on’t touch the sharp blades. Keep the blade unit away from children.
Only use the goblet with the blade unit supplied.
N
ever attempt to fit the blade unit to the machine without the goblet fitted.
A
lways unplug the machine before putting your hands or utensils in the
goblet.
N
ever run the blender empty.
O
nly operate the blender with the lid in place.
Never fit the blade unit to the power unit without the blender
g
oblet fitted.
A
lways take care when handling the blade assembly and avoid touching the
cutting edge of the blades when cleaning.
W
hen removing the blender from the power unit:
s
witch off;
wait until the blades have completely stopped;
m
odel AT283 care should be taken not to unscrew the goblet from the
b
ase assembly
Misuse of your blender can result in injury.
important
T
he skirt on the bottom of the AT282 acrylic goblet is fitted
d
uring manufacture and no attempt should be made to remove
i
t.
The attachment will not operate if it is incorrectly assembled
or incorrectly fitted to the kitchen machine or if the medium
speed outlet cover is not fitted.
Never run the blender for longer than one minute - it will overheat. Switch off
as soon as you have the right consistency.
Don’t put dry ingredients into the blender before switching on. Cut them into
cubes, then remove the filler cap and drop the cubes through the hole in the
lid whilst the machine is running.
model AT282 don’t process spices such as cloves, dill and cumin seeds -
they damage the acrylic.
Don’t use the blender as a storage container. Keep it empty before and after
use.
Never crush ice on its own, always add a little water.
model AT282 never blend more than 1.5 litres (2 pints 12fl oz) - less for
frothy liquids like milk shakes.
model AT283 never blend more than 1.2 litres (2 pints 2fl oz) - less for
frothy liquids like milk shakes.
Smoothie recipes - never blend frozen ingredients that have formed a solid
mass during freezing, break it up before adding to the blender.
key
acrylic blender AT282
lid
filler cap
goblet
sealing ring
blade unit
glass blender AT283
filler cap
lid
goblet
sealing ring
blade unit
base
to use your acrylic blender AT282
1 Ensure the sealing ring is correctly fitted on the blade unit.
2 Hold the underside of the blade unit and insert the blades into the base of
the blender. Twist to lock the assembly firmly in place.
3 Put your ingredients into the goblet.
4 Fit the lid to the goblet and twist clockwise into place, making sure that the
tab on the lid slots into the groove in the handle. When correctly fitted the
markings should align .
4
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood Prospero KM282 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood Prospero KM282 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info