606372
7
Zoom out
Zoom in
Previous page
1/48
Next page
5
TERMINAL DESCRIPTIONS
ACC (D-SUB 25 Pin Connector)
Pin No. Name I/O Description Specifi cation
1 NC Not used
2 COM1_RXD I Serial Data Input
RS-232C compatible
3 COM1_TXD O Serial Data Output
4 AUXI/O9 I/O Programmable Function I/O 9
Input Impedance 100 k
Output Impedance 100
5 DI I Data Input
0.5 V p-p (Typ.)
Input Impedance 20 k
6 MI2 I MIC Signal Input
5 mVrms(Typ.)
(STD Deviation)
Input Impedance 600
7 GND Ground Ground
8 AUXI/O8 I/O Programmable Function I/O 8
Input Impedance 100 k
Output Impedance 470
9 COM2_TXD O Serial Data Output
TTL (0V - 5V)
10 COM2_RXD I Serial Data Input
11 GND Ground Ground
12 AUXI/O7/BER_DATA I/O Programmable Function I/O 7 Input Impedance 100 k
Output Impedance 100
13 AUXI/O6/BER_CLK I/O Programmable Function I/O 6
14 SB O DC Power (Switched B) Output
13.6 V ±15%
2 A (Max)
15 AUXO2 O Programmable Function O 2 Open Drain
R (dc): 60 m (Max)
Idc (Max)= -500 mA

16 AUXO1 O Programmable Function O 1
17 AFO O AF Signal Output
0.7 V p-p (Typ.)
Output Impedance 100
18 GND Ground Ground
19 DEO O RX Detected Signal Output
0.28 Vp-p (Typ.)
Output Impedance 100
20 AUXI/O5 I/O Programmable Function I/O 5
Input Impedance 100 k
Output Impedance 470
21 AUXI/O4 I/O Programmable Function I/O 4
22 AUXI/O3 I/O Programmable Function I/O 3
23 AUXI/O2 I/O Programmable Function I/O 2
24 AUXI/O1 I/O Programmable Function I/O 1
25 ME Mic Ground Ground
Speaker Jack (3.5 mm Phone Jack) 4 W/ 4
Pin No. Name I/O Description Specifi cation
1 SPO O External Speaker Output 4 (Min)
3 GND Ground Ground
DC Input Connector
Pin No. Name I/O Description Specifi cation
Red B I DC Power Input 13.6 V ±15%
Black GND Ground Ground
Ignition Sense Input Terminal
Pin No. Name I/O Description Specifi cation
Yellow B I Ignition Sense Input 13.6 V ±15%
Microphone Jack
Pin No. Name I/O Description Specifi cation
1
BLC O Mic Backlight Control Output Impedance 1 k
D+ I/O USB Serial Data I/O USB 2.0
2 SB O DC Power (Switched B) Output
13.6 V ±15%
200 mA (Max)
3 GND Ground Ground
4
PTT I PTT Input Impedance 47 k
TXD O PC Serial Data from Radio UART TTL (0V to 5V)
5 ME Mic Ground Ground
6
MIC I Mic Signal Input Input Impedance 600
VBUS I USB VBUS 5 V/ 1 mA (Typ.)
7
HOOK I Hook Input Impedance 1 k
RXD I PC Serial Data to Radio UART TTL (0V to 5V)
D- I/O USB Serial Data I/O USB 2.0
8 DM I/O Mic Data Detection High Impedance
RF Antenna Terminal
50 impedance
GPS Antenna Terminal
50 impedance
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-5900B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-5900B in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info