606369
51
Zoom out
Zoom in
Previous page
1/69
Next page
BACKGROUND OPERATIONS
TIME-OUT TIMER (TOT)
The Time-out Timer can be activated only on Conventional channels and in NXDN
Trunking system. It is used to prevent any caller from using a channel for an extended
period of time.
If you continuously transmit for a period of time that exceeds the programmed time,
the transceiver will stop transmitting and an alert tone will sound. To stop the tone,
release the PTT switch. Your dealer can program the TOT time in the range of 15
seconds to 20 minutes.
If programmed by your dealer, a pre-alert tone will sound before the timer expires.
Also, if programmed by your dealer, you may have to wait for a short duration before
you can continue to transmit. If you press the PTT switch before the timer has been
reset, an alert tone will sound and the transceiver will not enter transmit mode.
BATTERY SAVER
The Battery Saver function can be activated only on Conventional channels. When
activated, this function decreases the amount of power used when a signal is not
being received and no operations are being performed (no keys are being pressed
and no switches are being turned).
While the channel is not busy and no operation is performed for 5 seconds, Battery
Saver activates. When a signal is received or an operation is performed, Battery
Saver is disabled.
LOW BATTERY WARNING
Low Battery Warning alerts you when the battery needs to be recharged.
Your dealer can set an alert tone to sound and the LED indicator to blink red when
the battery power is low. The battery power indicator displays the battery power
remaining, as illustrated below.
High
Sufficient
Low
Very low
When the battery power is very low, recharge or replace the battery pack.
51
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-5300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-5300 in the language / languages: English as an attachment in your email.

The manual is 12,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood NX-5300

Kenwood NX-5300 User Manual - English, German, Dutch, French - 224 pages

Kenwood NX-5300 User Manual - French - 69 pages

Kenwood NX-5300 User Manual - Italian, Portuguese, Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info