606369
48
Zoom out
Zoom in
Previous page
1/69
Next page
STATUS MESSAGE
You can send and receive 2-digit Status messages which may be decided in your
talk group. Messages can contain up to 16 alphanumeric characters. Status
messages range from 10 to 99 (80 ~ 99 are reserved for special messages).
A maximum of 32 received messages can be stored in the stack memory of your
transceiver. These saved messages can be reviewed after reception. Depending on
your dealer settings, when the stack memory is full, either the oldest message will be
erased when a new message is received or the new message will not be stored in
the stack memory. The indicator appears when a message is stored in the stack
memory.
o
Transmitting
1
Select your desired zone and channel.
2
Press the key programmed as [Status] to enter Status mode (proceed to step
5), or [Individual + Status]/ [Group + Status] to enter Selcall mode (proceed
to step 3).
3
Press the [J] and [K] keys to select the station you want to call.
If Manual Dialing is enabled, you can enter a station ID using the keypad or the [J]/[K]
key. When using the [J] and [K] keys, cycle through the digits to select a digit, then
press the [ ] or [ ] key to set the digit and move the cursor to the right. Repeat this
process until the entire ID is entered.
4
Press the [I] key to enter Status mode.
5
Press the [J] and [K] keys to select the status you want to transmit.
If Manual Dialing is enabled, you can enter a status ID using the DTMF keypad or the
[J]/[K] key (refer to step 3, above).
6
Press the PTT switch to initiate the call.
“Complete” appears on the display when the status has been successfully transmitted.
o
Receiving
The indicator will flash and a calling ID or text message will appear when a Status
call is received. Press any key to return to normal operation.
o
Reviewing Messages in the Stack Memory
1
Press the key programmed as [Stack], or press and hold the key programmed
as [Individual], [Group], [Status], [Individual + Status], or [Group +
Status] to enter Stack mode.
The last received message is displayed.
2
Press the [J] and [K] keys to select the desired message.
Message types are identified as follows:
: Caller ID, : Status Message, : Short Message
Press the [I] key to cycle the display information as follows:
Status/ Short Message Time Stamp CH Caller ID
Press the [H] key to cycle the display information as follows:
Status/ Short Message Caller ID CH Time Stamp
48
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-5300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-5300 in the language / languages: English as an attachment in your email.

The manual is 12,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood NX-5300

Kenwood NX-5300 User Manual - English, German, Dutch, French - 224 pages

Kenwood NX-5300 User Manual - French - 69 pages

Kenwood NX-5300 User Manual - Italian, Portuguese, Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info