606369
38
Zoom out
Zoom in
Previous page
1/69
Next page
SCRAMBLER (ANALOG)/ ENCRYPTION (P25/ NXDN)
Note:
The Scrambler function can be used only in Analog Conventional and Analog Trunking
Operation.
In NXDN systems, there are two types of encryption, namely bit scrambling method (built-
in encryption function) and AES (SCM*)/ DES (built-in-DES or SCM*). In P25 systems,
only AES (SCM*)/ DES (built-in-DES or SCM*) encryption is available.
* SCM (Secure Cryptographic Module) is a hardware cryptographic module developed
by JVC KENWOOD to provide cryptographic securities for digital two way radios.
The transceiver includes a built-in DES that allows you to set up to four Encryption keys.
SCM and the built-in DES cannot be operated simultaneously.
Ask your dealer for details concerning the Encryption DES/ AES settings.
SECURE (ENCRYPTED) TRANSMISSION
Press the key programmed as [Scrambler/ Encryption] to switch the transceiver to
secure (encrypted) transmission.
Alternatively, press the key programmed as [Menu] to enter Scrambler/ Encryption
Mode using the Menu Mode.
The Scrambler indicator (
) or Encryption indicator ( ) appears when the respective
function is turned ON.
Pressing the PTT switch after the Scrambler or Encryption function has been turned ON
encrypts the transmitted signal.
Each group member must activate their respective Scrambler/ Encryption functions to
descramble the received signals.
SELECTING THE SCRAMBLER CODE
1
Press the key programmed as [Scrambler/ Encryption Code] to enter
Scrambler/ Encryption Code Mode.
Alternatively, press the key programmed as [Menu] to enter Scrambler/ Encryption Code
Mode using the Menu Mode.
2
Press the [J] and [K] keys to increase or decrease the Scrambler code.
Up to 16 Scrambler codes can be used.
Each group member must use the same code in order for the transceivers to
descramble the received signals.
3
Press the [
] or [ ] key to set the new Scrambler code.
SELECTING THE ENCRYPTION KEY
1
Press the key programmed as [Scrambler/ Encryption Code] to enter
Scrambler/ Encryption Code Mode.
Alternatively, press the key programmed as [Menu] to enter Scrambler/ Encryption Code
Mode using the Menu Mode.
2
Select the new Encryption key using the [J] and [K] keys.
Up to 32 Encryption keys can be used. One of these keys will be used during
transmission.
When a call is received, the transceiver will descramble the call as long as the received
code is in the encryption list.
38
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-5300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-5300 in the language / languages: English as an attachment in your email.

The manual is 12,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood NX-5300

Kenwood NX-5300 User Manual - English, German, Dutch, French - 224 pages

Kenwood NX-5300 User Manual - French - 69 pages

Kenwood NX-5300 User Manual - Italian, Portuguese, Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info