606369
31
Zoom out
Zoom in
Previous page
1/69
Next page
FUNCTION DETAILS
SCAN
Scan is useful for monitoring signals on the transceiver channels. While scanning,
the transceiver checks for a signal on each channel and only stops on a channel if a
signal is present.
To begin scanning, press the key programmed as [Scan].
The indicator appears on the display.
The channels are scanned.
When a signal is detected on a channel, Scan pauses on that channel. The transceiver will
remain on the busy channel until the signal is no longer present. When the signal “drops
out”, the transceiver will remain on the channel momentarily before Scan resumes. This
delay time is programmed by your dealer. If a signal is received during the delay time, the
transceiver will remain on the same channel.
To stop scanning, press the [Scan] key again.
Note:
In order for Scan to operate, there must be at least 2 channels added to the scanning
sequence. If there are less channels than this, Scan will not operate.
TEMPORARY CHANNEL LOCKOUT
During scan, you can temporarily remove specific channels from the scanning
sequence by selecting them and pressing the key programmed as [Scan Delete/
Add].
The indicator no longer appears on the display for that channel.
The channel is no longer scanned. However, when scanning is ended and restarted, the
channels will reset and the channel will again be in the scanning sequence.
PRIORITY SCAN
A Priority channel must be programmed in order for Priority Scan to function.
When using a single Priority channel, the transceiver will automatically change to the
Priority channel when a call is received on it, even if a call is being received on a
normal channel.
When using dual Priority channels, Priority channel 1 is given precedence over
Priority channel 2. So, if a call is received on Priority channel 1 while a call is already
on Priority channel 2, the transceiver will automatically change to Priority channel 1.
or appears on the display when the channel is Priority channel 1 or 2 respectively.
The
indicator (red) appears on the display during Priority Scan.
31
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-5300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-5300 in the language / languages: English as an attachment in your email.

The manual is 12,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood NX-5300

Kenwood NX-5300 User Manual - English, German, Dutch, French - 224 pages

Kenwood NX-5300 User Manual - French - 69 pages

Kenwood NX-5300 User Manual - Italian, Portuguese, Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info