699507
14
Zoom out
Zoom in
Previous page
1/116
Next page
BASIC OPERATIONS
SWITCHING POWER ON/ OFF
Press [ ] to switch the transceiver ON.
Press [
] again to switch the transceiver OFF.
ADJUSTING THE VOLUME
Press the button programmed as [Volume Up] to increase the volume. Press the
button programmed as [Volume Down] to decrease the volume.
SELECTING A ZONE AND CHANNEL
Select the desired zone and channel using the buttons programmed as [Zone Up]/
[Zone Down] and [Channel Up]/ [Channel Down].
The transceiver may have names programmed for zones and channels. The zone name
and channel name can contain up to 14 characters. While selecting a zone, the zone name
will appear above the channel name.
If programmed by your dealer, your transceiver will announce the zone and channel
numbers as you change them.
TRANSMITTING
1
Select the desired zone and channel.
2
Press the PTT switch and speak into the microphone. Release the PTT switch to
receive.
The LED indicator lights red while transmitting and green while receiving a signal. This
indicator can also be disabled by your dealer.
For best sound quality at the receiving station, hold the microphone approximately 1.5
inches (3 cm to 4 cm) from your mouth.
RECEIVING
Select the desired zone and channel. If signaling has been programmed on the
selected channel, you will hear a call only if the received signal matches your
transceiver settings.
12
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-3720G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-3720G in the language / languages: All languages as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info