Manual Kenwood NX-320E (page 14 of 308) (English, German, Dutch, French, Italian, Turkish, Spanish)

796125

Zoom out

Zoom in

1/308

INSTALLING THE BELT CLIP

Note: When first installing the belt clip, you must remove the

battery pack from the rear of the transceiver.

1 Remove the 2 screws from the

rear of the transceiver, then

remove the small, plastic black

covering that was held in place.

2 Insert the belt clip mount into

the space on the rear of the

transceiver.

3 Using the 2 screws, affix the belt

clip in place.

• When the belt clip is not installed, leave the plastic covering in

place.

• Do not use glue which is designed to prevent screw loosening

when installing the belt clip, as it may cause damage to the

transceiver. Acrylic ester, which is contained in these glues, may

crack the transceiver’s back panel.

INSTALLING THE CAP OVER THE SPEAKER/ MICROPHONE JACKS

Install the cap over the speaker/ microphone jacks when not

using an optional speaker/ microphone.

Note: To keep the transceiver water resistant, you must cover the

speaker/ microphone jacks with the supplied cap.

1 Place the cap over the jacks so that the

locking tabs insert into the transceiver

grooves.

Plastic

covering

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-320E in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 3.49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood NX-320E Manual

Product: