683138

Kenwood NX-3000 series Manual

66
Zoom out
Zoom in
Previous page
1/70
Next page
BUILT-IN MEMORY
Voice recordings recorded using Auto Recording and the GPS data received are
stored in the built-in memory of this transceiver.
Auto Recording
Auto Recording records and retains your last conversation, allowing you to catch
what you may have missed hearing during the conversation.
If activated, the auto recording function will continuously record all transmitted and
received signals to the built-in memory according to the maximum recording length
set.
●
The indicator blinks while recording is in progress.
When recording is made to the built-in memory, the backup timing of the voice
recording varies according to the First-in First-out Deletion setting. If First-in First-out
Deletion is enabled, the recording is backed up when the transceiver is turned off
using the Power switch. If disabled, the recording is backed up each time a recording
is made. For details on the First-in First-out Deletion function, consult your dealer.
Note:
●
Recording stops when the maximum recording length is reached.
●
New recordings cannot be made when the built-in memory is full. However, if the First-in
First-out Deletion function is enabled, the oldest audio data will be deleted to make space
for new recordings.
●
If the First-in First-out Deletion function is enabled and recording is made to the built-in
memory, the transceiver turns off without backing up the recording when it is turned off in
the following situations:
–
When the battery runs out
–
When the battery pack is removed from the Portable transceiver
–
When the power cable is unplugged on the Mobile transceiver
●
You can play back the voice recording in Playback mode, or delete the recording if
necessary.
●
If Auto Recording is used concurrently with the GPS Data Storage function, the beginning
of the audio recorded by Auto Recording may be clipped off.
GPS Data Storage
The GPS data is stored temporarily in the transceiver RAM at every GPS Storage
Interval from the GPS unit. The data will be written to the built-in memory when more
than three pieces of data are collected. The stored GPS data in the built-in memory
can be sent from the transceiver via DMR/ NXDN Air Protocol or can be read on a
PC.
66
… 66 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-3000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-3000 series in the language / languages: English as an attachment in your email.

The manual is 9,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood NX-3000 series

Kenwood NX-3000 series User Manual - English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info