683138
60
Zoom out
Zoom in
Previous page
1/70
Next page
When pairing is complete, your transceiver will connect to the Bluetooth headset. When
the connection is established, you can perform hands-free call.
The “ ” indicator appears on the display.
Note:
Once the headset has been paired, it can be used automatically with the transceiver the
next time the transceiver and headset are powered on. If the headset cannot be used
automatically, connect manually using the My Device setting in the Bluetooth menu of the
transceiver.
(Some headset models cannot be used automatically.)
Up to 10 Bluetooth devices can be registered to your transceiver.
The pressing of the button programmed as Bluetooth Connect/ Disconnect does not affect
the status of the Bluetooth connection via Serial Port Profile or Bluetooth Low Energy
(Heart Rate Service, Automatic Injury Detection Service, Device Information Service and
Battery Service).
o
Making hands-free call
Press the PTT switch to activate the microphone of the Bluetooth headset.
Note:
The volume level can only be adjusted on the Bluetooth headset. The volume control of
the transceiver does not function. However, if the audio is set to output from the built-in
speaker of the transceiver in the Bluetooth Speaker setting, the volume level is controlled
by the transceiver.
The microphone sensitivity can be set using the External Mic Sense function.
.
o
Connecting to a PC
To connect to a PC using the Serial Port Profile, you have to make a request for
connection from the PC to your transceiver. The transceiver will start to connect once
it received the request from the PC.
Once the connection has been established, your transceiver can start
communicating with the Field Programming Unit (FPU) or you can use the PC
Interface Protocol.
The “ ” indicator appears on the display.
The transceiver transits to each mode when the FPU communication begins. To use
the PC Interface Protocol, run the PC commands.
60
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-3000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-3000 series in the language / languages: English as an attachment in your email.

The manual is 9,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood NX-3000 series

Kenwood NX-3000 series User Manual - English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info