683138
57
Zoom out
Zoom in
Previous page
1/70
Next page
Profile Description
Heart Rate Service Heart Rate Service is a function that sends the heart
rate [bpm] to the transceiver from a Bluetooth-enabled
device (such as heart rate monitor) that supports Heart
Rate Service. The transceiver can send the heart rate
via Status or activate the Emergency operation. When
a Status request message is received from the Base
Station, the transceiver can respond with the heart rate
via Status or send the heart rate together with the GPS
data via Status.
Automatic Injury Detection
Service
Automatic Injury Detection Service is a function that
notifies the transceiver from the Bluetooth-enabled
device when the Bluetooth-enabled device that
supports Automatic Injury Detection Service is
damaged. Up to two Bluetooth-enabled devices can be
connected to the transceiver at the same time. To use
this service, it is necessary to enable the Injury
Detection setting. For details, consult your dealer.
Battery Service The transceiver displays the remaining battery power
[%] of the Bluetooth-enabled device on the screen
when a Bluetooth-enabled device that supports Heart
Rate Service or Automatic Injury Detection Service is
connected to the transceiver.
Device Information Service The transceiver displays the information of the
Bluetooth-enabled device such as manufacturer name
and model number on the screen when a Bluetooth-
enabled device that supports Heart Rate Service or
Automatic Injury Detection Service is connected to the
transceiver.
o
Selecting the Bluetooth headset type
You can select the type of Bluetooth headset to be connected to the transceiver via
HSP connection.
1
Press the button programmed as [Menu] to enter Bluetooth Headset Connection
Type Mode using the Menu Mode.
2
Press the [J] and [K] buttons to select the desired headset type.
3
Press the [
] or [ ] button to confirm the selection.
The selection is backed up and will take effect the next time the transceiver is turned
on.
Note:
If you exit the Bluetooth Headset Connection Type Mode without pressing the [ ] or [ ]
button, the headset type selected will not be reflected in the menu setting.
Most Bluetooth headsets can be connected and operated by selecting “Headset 1” in
“Bluetooth Headset Connection Type”. For some headsets, it is necessary to select
“Headset 2”. For details, refer to the following URL:
http://manual2.jvckenwood.com/com/help_ref/nx5000_series/compatible_model_list/CNMJSYnnzoitpv.html
57
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-3000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-3000 series in the language / languages: English as an attachment in your email.

The manual is 9,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood NX-3000 series

Kenwood NX-3000 series User Manual - English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info