683138
48
Zoom out
Zoom in
Previous page
1/70
Next page
STATUS MESSAGE
You can send and receive 2-digit Status messages which may be decided in your
talk group. Messages can contain up to 16 alphanumeric characters. Status
messages range from 10 to 99 (80 ~ 99 are reserved for special messages).
A maximum of 250 received messages can be stored in the stack memory of your
transceiver. These saved messages can be reviewed after reception. Depending on
your dealer settings, when the stack memory is full, either the oldest message will be
erased when a new message is received or the new message will not be stored in
the stack memory. The indicator appears when a message is stored in the stack
memory.
o
Transmitting
1
Select your desired zone and channel.
2
Press the button programmed as [Status] to enter Status mode (proceed to step
5), or [Individual + Status]/ [Group + Status] to enter Selcall mode (proceed
to step 3).
3
Press the [J] and [K] buttons to select the station you want to call.
If Manual Dialing is enabled, you can enter the station ID by using the keypad on a full
button model Portable transceiver or on the microphone of a Mobile transceiver.
4
Press the [I] button to enter Status mode.
5
Press the [J] and [K] buttons to select the status you want to transmit.
If Manual Dialing is enabled, you can enter the status ID by using the keypad on a full
button model Portable transceiver or on the microphone of a Mobile transceiver.
6
Press the PTT switch to initiate the call.
“Complete” appears on the display when the status has been successfully transmitted.
o
Receiving
The indicator will flash and a calling ID and status message will appear when a
Status call is received. Press any button to return to normal operation.
o
Reviewing Messages in the Stack Memory
1
Press the button programmed as [Stack], or press and hold the button
programmed as [Individual], [Group], [Status], [Individual + Status], or
[Group + Status] to enter Stack mode.
The category list is displayed.
However, depending on the stack settings programmed by your dealer, the individual
list (Caller ID, Status Message or Short Message) may be displayed instead of the
category list. For details on the stack settings, consult your dealer.
The categories are identified as follows:
: Caller ID, : Status Message, : Short Message
2
Press the [J] and [K] buttons to select the desired category, then press the [
]
or [
] button.
The Caller ID list, Status Message list or Short Message list is displayed according to
the category selected. Pressing the [H]/[I] buttons allows you to cycle the display
information as follows.
While Caller ID list is displayed:
[H]: Caller ID > CH > Time Stamp
[I]: Caller ID > Time Stamp > CH
48
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-3000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-3000 series in the language / languages: English as an attachment in your email.

The manual is 9,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood NX-3000 series

Kenwood NX-3000 series User Manual - English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info