683138
40
Zoom out
Zoom in
Previous page
1/70
Next page
SCRAMBLER (ANALOG/ LTR)/ ENCRYPTION (NXDN/ DMR)
Note:
The Scrambler function can be used only in Analog Conventional and LTR Trunking
Operation.
The following types of encryption are available depending on the system used.
NXDN : Bit scrambling (built-in encryption function), 56-bit DES and 256-bit AES
DMR : Bit scrambling (built-in encryption function), 56-bit DES, 256-bit AES and
Enhanced Encryption
Ask your dealer for details concerning the Encryption DES/ AES and Enhanced Encryption
settings.
SECURE (ENCRYPTED) TRANSMISSION
Press the button programmed as [Scrambler/ Encryption] to switch the transceiver
to secure (encrypted) transmission.
Alternatively, press the button programmed as [Menu] to enter Scrambler/ Encryption Mode
using the Menu Mode.
The Scrambler indicator (
) or Encryption indicator ( )* appears when the respective
function is turned ON.
Pressing the PTT switch after the Scrambler or Encryption function has been turned ON
encrypts the transmitted signal.
*
The indicator displayed varies depending on the type of Encryption function activated. Refer to
“INDICATOR LIST” {p. 68} .
SELECTING THE SCRAMBLER CODE
1
Press the button programmed as [Scrambler/ Encryption Code] to enter
Scrambler/ Encryption Code Mode.
Alternatively, press the button programmed as [Menu] to enter Scrambler/ Encryption
Code Mode using the Menu Mode.
2
Press the [J] and [K] buttons to increase or decrease the Scrambler code.
Up to 16 Scrambler codes can be used.
3
Press the [
] or [ ] button to set the new Scrambler code.
SELECTING THE ENCRYPTION KEY
1
Press the button programmed as [Scrambler/ Encryption Code] to enter
Scrambler/ Encryption Code Mode.
Alternatively, press the button programmed as [Menu] to enter Scrambler/ Encryption
Code Mode using the Menu Mode.
2
Select the new Encryption key using the [J] and [K] buttons.
Up to 32 Encryption keys can be used. One of these keys will be used during
transmission.
3
Press the [
] or [ ] button to set the new Encryption key.
Note:
In NXDN systems, a key error will be displayed when a Key ID which is 0x40 and above
is selected for the AES/DES encryption function.
To restore to the default Encryption key, select “Preset”. However, if you delete the
Encryption key, it will not be recovered.
40
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-3000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-3000 series in the language / languages: English as an attachment in your email.

The manual is 9,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood NX-3000 series

Kenwood NX-3000 series User Manual - English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info