683138

Kenwood NX-3000 series Manual

34
Zoom out
Zoom in
Previous page
1/70
Next page
SCAN REVERT
The Scan Revert channel is the channel selected when you press the PTT switch to
transmit during scan. Your dealer can program one of the following Scan Revert
channels:
●
Selected: The last channel selected is assigned as the new revert channel.
●
Selected + Talkback: If the channel has been changed, the newly selected channel is
assigned as the new revert channel. The transceiver “talks back” on the current channel.
●
Priority 1/ Priority 2: If your dealer has programmed a Priority channel (either Priority 1 or
Priority 2), this channel is the revert zone and channel.
●
Priority 1 + Talkback/ Priority 2 + Talkback: If your dealer has programmed a Priority
channel (either Priority 1 or Priority 2), this channel is the revert zone and channel. The
transceiver “talks back” on the current receive channel.
●
Last Called + Selected: The last channel on which you received a call is assigned as the
new revert channel. The transceiver “talks back” on the current channel. If the channel has
been changed, the newly selected channel is assigned as the new revert channel.
SCAN PROGRAMMING
Note:
●
Scan programming is only available when Scan Type has been set to “List”.
o
Scan List Editing
You can reprogram your scan list to add or delete any zones or channels.
1
Select the channel where the scan list to be edited has been set, press the button
programmed as [Scan Program] to enter Scan Program Mode.
Alternatively, press the button programmed as [Menu] to enter Scan Program Mode using
the Menu Mode.
2
Press the [H] and [I] buttons to select the zone or the [J] and [K] buttons to select
the channel you will add to or remove from the scan list.
3
Press the [
] or [ ] button to confirm your selection.
●
The indicator appears on the display when a zone is added to the scan list, and
disappears when a zone is removed from the scan list.
●
The indicator appears on the display when a channel is added to the scan list, and
disappears when a channel is removed from the scan list.
4
Press the [ ] button to exit scan programming.
Note:
●
A zone/ channel cannot be added to the scan list in the following cases.
–
When it has already been added to the scan list.
–
When a channel that is not compatible with the Scan Type in the Scan List setting has
been selected.
●
A zone/ channel cannot be deleted from the scan list in the following cases.
–
When the channel to be deleted is a Priority channel.
–
When there is no added channel in the scan list.
34
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood NX-3000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-3000 series in the language / languages: English as an attachment in your email.

The manual is 9,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood NX-3000 series

Kenwood NX-3000 series User Manual - English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish - 224 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info