Manual Kenwood NX-220E3 (page 34 of 308) (English, German, Dutch, French, Italian, Turkish, Spanish)

796128

Zoom out

Zoom in

1/308

■ Stun Code

This function is used when a transceiver is stolen or lost.

When the transceiver receives a call containing a stun

code, the transceiver becomes disabled. The stun code is

cancelled when the transceiver receives a call with a revive

code.

EMERGENCY CALLS

If your transceiver has been programmed with the Emergency

function, you can make emergency calls.

1 Press and hold the key programmed as [Emergency].

• Ask your dealer for the length of time necessary to hold this

key before the transceiver enters Emergency mode.

• When the transceiver enters Emergency mode, it will change

to the Emergency channel and begin transmitting based on

how it is set up by your dealer.

2 To exit Emergency mode, press the [Emergency] key

again.

• If the Emergency mode completes a preset number of cycles,

Emergency mode will automatically end and the transceiver

will return to the zone and channel that was in use before

Emergency mode was entered.

Note:

◆ Your dealer can set the transceiver to emit a tone when

transmitting in Emergency mode.

◆ Your dealer can set the transceiver to emit tones and received

signals as normal, or mute the speaker during Emergency

operation.

■ Activity Detection

Press the key programmed as [Activity Detection],

toggle Activity Detection ON and OFF. If an event occurs

while Activity Detection is enabled, the transceiver enters

Emergency mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-220E3 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 3.49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood NX-220E3 Manual

Product: