Manual Kenwood NX-220E3 (page 22 of 308) (English, German, Dutch, French, Italian, Turkish, Spanish)

796128

Zoom out

Zoom in

1/308

BASIC OPERATIONS

SWITCHING POWER ON/OFF

Turn the Power switch/ Volume control clockwise to switch the

transceiver ON.

Turn the Power switch/ Volume control counterclockwise fully

to switch the transceiver OFF.

■ Transceiver Password (Types I and II Only)

If your transceiver is password protected, you must first

enter the password before you can use the transceiver.

1 Rotate the Selector to select the first digit of the

password.

2 Press the S or key to accept the entry and move to

the next digit.

• Press the A or # key to delete an incorrect digit.

3 Repeat steps 1 and 2 to enter the entire password.

• The password can contain a maximum of 6 digits.

4 Press the S or key to confirm the entered password.

• If you enter an incorrect password, an error tone sounds

and the transceiver remains locked.

ADJUSTING THE VOLUME

Rotate the Power switch/ Volume control to adjust the volume.

Clockwise increases the volume and counterclockwise

decreases it.

SELECTING A ZONE AND CHANNEL/GROUP ID

Select the desired zone using the key programmed as [Zone

Select] or [Zone Up/Down]. Each zone contains a group of

channels.

Select the desired channel/group ID using the Selector knob

(default). Each channel/group ID is programmed with settings

for transmitting and receiving.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-220E3 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 3.49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood NX-220E3 Manual

Product: