Manual Kenwood NX-220E3 (page 15 of 308) (English, German, Dutch, French, Italian, Turkish, Spanish)

796128

Zoom out

Zoom in

1/308

2 While holding the cap in place, push it

towards the bottom of the transceiver until

the tabs on the cap click into place.

• To remove the cap, hold the top of the cap in

place with your finger while inserting a

3 mm or smaller flat blade screwdriver under

the bottom of the cap. Slowly slide the

screwdriver in until its tip touches the tab

inside the cap, then gently pry the cap up

(handle of screwdriver moving away from the

transceiver) to remove the cap.

INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE

Note: The transceiver is not fully water resistant when using a

speaker/ microphone or headset.

1 Insert the speaker/ microphone plugs

into the speaker/ microphone jacks of the

transceiver.

2 Place the locking bracket over the speaker/

microphone plugs so that the locking tabs

insert into the transceiver grooves.

3 While holding the locking bracket in

place, push it towards the bottom of the

transceiver until the tabs on the bracket

click into place.

• To remove the locking bracket, push the

bracket up from the base.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood NX-220E3 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 3.49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood NX-220E3 Manual

Product: