158517
56
Zoom out
Zoom in
Previous page
1/76
Next page
56
Application section
Remote operation of other components (NV-701 only)
Refer to the setup codes to determine the correct
manufacturer's code for the component.
Except for U.K. and Europe ´
For U.K. and Europe
÷ The codes and controllable components may differ de-
pending on the model and region where this unit is
operated.
Verify the code by turning the component
ON (or OFF) by pressing down one of the
POWER keys for more than 2 seconds.
If the component turns on or off when the corre-
sponding key is pressed, the code was entered cor-
rectly.
÷ If the component does not respond when you try to
control it, repeat the procedure from step 1 and enter the
next setup code on the list. Repeat this procedure until
you find the code that matches the component.
÷ Point the remote control unit at the other component to
control.
÷ The remote control unit may not operate other compo-
nents if the batteries are weak. If you should notice a
shortening in the distance from which the remote control
unit can operate, replace both batteries with new ones.
1
Press and hold the SETUP key.
2
Enter the code number of the compo-
nent you want to control.
3
Release the SETUP key.
4
Verify the code by controlling the
other component.
OSD
SETUP
It is necessary to depress the SETUP key through-
out the setup procedure, or the SETUP mode will
be exited and the setup cannot be completed cor-
rectly.
123
456
789
0 +10
When you control another component, the keys on
the remote control unit do not operate to control the
current input of the main unit (CD, TAPE, TUNER). In
order to return to controlling the main unit with the
remote control unit, press the QUIT (DISC 3) key.
For example, to input the code of a Kenwood
DVD player, enter the code 805.
For U.K. and
Europe
For North America
Repeat steps 1 through 4 to input the codes of your
other components.
8)5
DVD
TV
POWER
VCR
CD-R
CABLE
DVD
TV
POWER
VCR
CD-R
Setting up the remote control unit
You can control other components that you have using the remote control unit of this unit.
OSD
SETUP
QUIT
DISC 3
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood nv 301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood nv 301 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info