630884
8
Zoom out
Zoom in
Previous page
1/116
Next page
G
U
se the medium and coarse
screens for raw meat; fish and
n
uts.
4
Loosely fit the ring nut.
to use the mincer
1 Release the locking screw by
turning anticlockwise , then slide
t
he attachment into the outlet .
2 Turn it both ways until it locks into
place. Then turn the locking screw
clockwise to secure.
3 Tighten the ring nut manually.
4 Fit the tray. Put the dish/cover
under the mincer to catch the
food.
5 Thaw frozen food thoroughly
before mincing. Cut meat into
2.5cm (1”) -wide strips.
6 Switch on . Using the pusher,
gently push the food through, one
piece at a time. Don’t push
hard – you could damage
your mincer.
G
If the machine stalls or jams during
use, switch off. Depress the
reverse switch for a few
seconds to release the clogged
food. Unplug and remove any
clogged material.
sausage filler
base plate*
large nozzle* (for thick sausages)
small nozzle* (for thin sausages)
* Stored in the pusher
Use pig/hog skin on the large
nozzle and sheep/lamb skin on the
small nozzle. Or, instead of using
skin, roll in breadcrumbs or
seasoned flour before cooking.
to use the sausage filler
1 If you’re using skin, soak it in cold
water for 30 minutes first.
2 Release the locking screw by
turning anticlockwise , then slide
the attachment into the outlet .
3 Turn it both ways until it locks into
place. Then turn the locking screw
clockwise to secure.
4 Fit the scroll inside the mincer
body.
5
Fit the base plate - put the
n
otch over the pin.
6 If you’re using skin, open it up with
a
jet of water. Then put your
c
hosen nozzle under a running tap
and pull the skin onto the nozzle.
7
Hold the nozzle on the mincer and
s
crew the ring nut on .
8 Fit the tray.
9 Switch on. Using the pusher, push
the food through. Don’t push
hard you could damage
your mincer. Ease the skin off
the nozzle as it fills. Don’t overfill.
10Twist the skin to form sausages.
pork sausage recipe
100g (4oz) dry bread
600g (1
1
2lb) pork, lean and fat, cut
into strips
1 egg, beaten
5ml (1tsp) mixed herbs
salt and pepper
1 Soak the bread in water, then
squeeze.
2 Mince the pork into a bowl.
3 Add the remaining ingredients and
mix well.
4 Make into sausages (see above).
5 Fry, grill or bake until golden
brown.
kebbe maker
shaper*
cone*
* Stored in the pusher
Kebbe is a traditional Middle
Eastern dish: deep-fried lamb-and-
bulgur-wheat parcels with a
minced meat filling.
to use the kebbe
maker
1 Release the locking screw by
turning anticlockwise , then slide
the attachment into the outlet .
2 Turn it both ways until it locks into
place. Then turn the locking screw
clockwise to secure.
3 Fit the scroll inside the mincer
body.
4
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood MG47 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood MG47 in the language / languages: All languages as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info