683121
13
Zoom out
Zoom in
Previous page
1/20
Next page
13
Using the DAB+ Radio _________________________________________________________
Press DAB on the remote control or the Source button on the main device until you see "DAB" in the display.
Setting the DAB+ stations
When commissioning the device, it carries out a station search. The stations found are stored alphabetically in
the station list.
Restarting the automatic station search
Press the MENU button to get the DAB menu.
The display will show "FULL SCAN". Begin the search pressing Enter.
During the search, the display shows the number of stations it has found so far.
If the search finds no stations, the message "NO DAB" will appear for approximately 2 seconds, which then
changes to show "FULL SCAN".
Please check that the aerial is connected correctly or try to find another place for the device for a better
reception.
Manually setting stations
Press the MENU button to bring up the DAB menu.
Press the button TUN+ until "MANUAL" appears in the display.
Confirm by pressing Enter and the display shows the channel currently set with its frequency.
Press the TUN+ or TUN- buttons to choose another station manually.
Press the Enter button to confirm this choice. The signal level will appear in the display and pressing the key
again loads the current ensemble.
Finding a DAB+ station
Find the stations stored alphabetically in the station list as follows:
Press TUN+ or TUN- on the remote control to scroll backwards or forwards in the station list.
When you find the correct station, press Enter on the remote control or wait about 2 seconds to begin
playback.
The message "LOADING" will appear in the display.
If the signal strength for your chosen station is too low for good quality playback, "OFF AIR" will appear in
the display. Please choose another station.
Saving stations in the station memory
There are 20 memory slots where you can store DAB stations for easy retrieval. To use the memory function,
please do the following:
Choose a station to save.
Press the PRG button until the display flashes and suggests a memory location. An empty memory location
will show as "EMPTY" and, if already in use, will show the frequency. You can use a memory location that has
been used before.
Press the TUN+ or TUN- buttons to choose a memory location.
Confirm storage with the Enter button. The display will briefly flash the message "STORED".
The stations can now be selected with the or buttons.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood M-817DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood M-817DAB in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood M-817DAB

Kenwood M-817DAB User Manual - German - 20 pages

Kenwood M-817DAB User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info