795400

Kenwood M-725DAB Manual

24
Zoom out
Zoom in
Previous page
1/100
Next page
4
Overload
• Never overload mains sockets, extension cords or multiple sockets, otherwise there is a risk of fire or
electric shock.
Penetration of foreign material and liquid
• Be careful not to allow foreign material or liquid to enter this device through ventilation holes,
otherwise it may come into contact with high voltage components or short circuit resulting in a fire
or electric shock. Never spill liquids of any kind on this device.
Maintenance
• Never attempt to carry out the maintenance of this device yourself, because live parts can be
exposed through the openings or by removing covers, contacting which can be hazardous. Leave all
maintenance to qualified service personnel.
Damage requiring repair
• Maintenance and repair work should only be carried out by a qualified customer service.
Maintenance/repair is required if the device has been damaged (e.g. the power cable or plug), if
liquid has spilled into the device, if objects have penetrated the device, if the device has been
exposed to rain or moisture, if it no longer works properly or has fallen down.
Spare parts
• If replacement parts are required, make sure that the customer service technician uses spare parts
specified by the manufacturer or that have the same characteristics as the original parts. Unauthor
ised parts may cause fire, electric shock or other accidents.
Safety test
• After completing service or repair of this device, ask the customer service technician to perform a
safety test to determine if the equipment is in good working order.
Heat
• Do not install the device near hot surfaces, such as radiators, fan heaters, stoves or other devices
(including amplifiers) that can be hot. Never place objects with open flame, such as candles or
lanterns, on or near the device. The batteries installed in the remote control should not be exposed
to excessive heat such as direct sunlight, fire, etc.
Batteries
• If you do not use the device for a month or more, remove the batteries from the battery com
partment of the remote control to prevent it from leaking. Immediately dispose of leaking batteries
properly and observe all relevant legal regulations. Leaking batteries can cause injury and damage
the device. Never mix batteries of different types or old and new batteries.
To minimise the risk of electric shock, re, etc.
• do not remove screws, covers or body parts.
• the power button does not completely disconnect the power supply in any position.
In order to completely disconnect the device from the power supply, please pull the mains plug out of
the socket.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood M-725DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood M-725DAB in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info