795401
30
Zoom out
Zoom in
Previous page
1/100
Next page
Connection of USB devices
1. Press the button to select standby mode.
2. Connect the USB device to the USB port on the front side.
Removal of the USB device
1. Press the button to select standby mode.
2.RemovetheUSBdevicefromtheUSBport.
• Always wait until the device has completely read the CD/USB device before continuing.
• If no CD has been laid in the CD compartment, “NO DISC” will be displayed.
•IfthereisnoplayableaudioleintheUSBdevice,“NO SONG” will be displayed.
•Thereadingtimecanexceed10secondswithaudiolesifthereisagreatquantityofmusic
on a CD or USB device.
Playback of CD or audio files (USB, CD)
On the remote control: With the
Source button, select the source and press the button to
begin playback.
On the main device: Using the
4. 5 mm
27 .0 mm
5. 8 mm
4. 3 mm
button, select the desired source and press the button to
begin playback
InUSBdevicesorCDswhichcontainaudioles(e.g.MP3),thenumberoffolderspresentandthe
leswillbedisplayedasfollows:
Fxx XXX
Here the number behind “F”stands for the number of folders and the second block of numbers for
thetotalnumberofles.
For audio CDs, the information about the number of tracks and total play time will be displayed as
follows:
XX XX:XX
Heretherstblockofnumbersstandsforthenumberoftracksandthesecondforthetotalplaytime
of the CD.
Basic Operating Functions
Stopping Playback: Press the button on the main device or on the remote control to stop
playback.
Interrupting Playback: Press the button on the main device or on the remote control to inter-
ruptplayback.Thedisplayashesduringthis.Ifyoupressthebuttononemoretimetheplayback
continues.
Searching for a specific passages during playback: Keep the or button on the main
device or the remote control pressed down for longer than 2 seconds to activate fast rewind or fast
forward. As soon as the desired place is reached, release the relevant button again.
Selecting a specific track: Press the or button on the main device or on the remote control
in playback, pause or stop mode.
Jump by 10 tracks: Press the +10 or -10 button on the remote control in playback, paus or stop
mode.
Selecting a specific folder (only with audio files): Press the Fold+ or Fold- button on the remote
control to select a folder.
10
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood M-720DAB - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood M-720DAB - 2020 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info