63925
19
Zoom out
Zoom in
Previous page
1/24
Next page
English
19
Using the cassette
Recording from a CD/ audio  le
1 Insert a disc or a USB device.
2 Insert a blank cassette tape into the tape deck.
3 Press the desired source button to select the
source you want to record from.
For CD/ audio  le-CD : Press CD/USB [CD/USB]
button to select CD input.
For USB device : Press CD/USB [CD/USB] button to
select USB input.
4 To record all the tracks/ les:
Stop playback.
To record a single track/ le:
Play the track/ le to be recorded.
5 Press TAPE REC [TAPE rec] button to set the unit
into recording standby mode.
The icon TAPE REC appears on the display.
6 Press FWD PLAY 3/8 [3/8] or RVS PLAY 2/8
[2/8] button to begin recording.
The icon “SYNC appears on the display.
To ensure good system performance, wait until the unit
completely reads the disc/USB device before recording.
To temporarily pause the recording, press FWD PLAY 3/8
[3/8] or RVS PLAY 2/8 [2/8] button. Press it again to
resume recording.
To end recording, press 7 [7 stop] button.
During recording, it is not possible to listen to another source.
Program recording from a CD/ audio  le
Desired CD tracks/ audio  le can be programmed in
the desired sequence and recorded onto a tape.
1 Insert a disc or a USB device.
2 Insert a blank cassette tape into the tape deck.
3 Press the desired source button to select the
source you want to record from.
For CD/ audio  le-CD : Press CD/USB [CD/USB]
button to select CD input.
For USB device : Press CD/USB [CD/USB] button to
select USB input.
4 Make sure that the unit is in stop mode.
Playing a cassette tape
1 Press TAPE mode [TAPE mode] button to TAPE.
2 Press the area marked [push open] to open the
cassette tape door.
3 Insert cassette tape into the compartment with
the open edge facing down.
4 Close the door securely.
5 Press TAPE mode [TAPE mode] button to select
the desired reverse mode.
icon : plays both sides and stops.
icon : plays both sides endlessly.
icon : plays only one side of the tape and
stops.
6 Press SEARCH/TUNING 4 or ¢ [4 or ¢
search +/–] button to move tape to the desired
starting point.
7 Press FWD PLAY 3/8 [3/8] or RVS PLAY 2/8
[2/8] button to begin playing the tape.
Recording on a cassette tape
You can record from a radio, a CD, a audio  le, or a
iPod.
For the best recording, use a normal bias tape (Type
1 only).
Recording from a radio
1 Insert a cassette tape into the tape
compartment and close the door.
2 Press TUNER band [TUNER band] button to
TUNER and select a radio station.
3 Press TAPE REC [TAPE rec] button to set the unit
into recording standby mode.
The icon TAPE REC appears on the display.
4 Press FWD PLAY 3/8 [3/8] or RVS PLAY 2/8
[2/8] button to begin recording.
To end recording, press 7 [7 stop] button.
To temporarily pause the recording, press FWD PLAY 3/8
[3/8] or RVS PLAY 2/8 [2/8] button. Press it again to
resume recording.
continued to next page
B60-5763-08_00_M-707i_English.in19 19B60-5763-08_00_M-707i_English.in19 19 08.7.9 6:16:00 PM08.7.9 6:16:00 PM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood M-707I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood M-707I in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood M-707I

Kenwood M-707I User Manual - German - 24 pages

Kenwood M-707I User Manual - Dutch - 24 pages

Kenwood M-707I User Manual - French - 24 pages

Kenwood M-707I User Manual - Italian - 24 pages

Kenwood M-707I User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info