Manual Kenwood M-505 USB (page 3 of 24) (English)

62147

Zoom out

Zoom in

1/24

6. Power Sources –

This product should be operated

only from the type of power source indicated on the

product. If you are not sure of the type of power supply

to your home, consult your product dealer or local power

company.

CAUTION

– Polarization – This product may

be equipped with a polarized alternating-current line

plug (a plug having one blade wider than the other).

This plug will  t into the power outlet only one way. This

is a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If the plug

should still fail to  t, contact your electrician to replace

your obsolete outlet. Do not defeat the safety purpose

of the polarized plug.

8. Power Cord Protection – Power-supply cords

should be routed so that they are not likely to be

walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit

from the product.

9. Lightning – For added protection for this product

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the product due to

lightning and power-line surges.

10. Overloading – Do not overload wall outlets,

extension cords, or integral convenience receptacles as

this can result in a risk of  re or electric shock.

11. Object and Liquid Entry – Never push objects of

any kind into this product through openings as they

may touch dangerous voltage points or short-out parts

that could result in a  re or electric shock. Never spill

liquid of any kind on the product.

12. Servicing – Do not attempt to service this product

yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all

servicing to quali ed service personnel.

13. Damage Requiring Service – Unplug this product

from the wall outlet and refer servicing to quali ed

service personnel under the following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen

into the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by

following the operating instructions.

e) If the product has been dropped or damaged in

any way, and

f) When the product exhibits a distinct change in

performance – this indicates a need for service.

g) If an abnormal smell or smoke is detected.

14.

Replacement Parts – When replacement parts

are required, be sure the service technician has used

replacement parts speci ed by the manufacturer or have

the same characteristics as the original part. Unauthorized

substitutions may result in  re, electric shock, or other

hazards.

15. Safety Check – Upon completion of any service

or repairs to this product, ask the service technician to

perform safety checks to determine that the product is

in proper operating condition.

16. Wall or Ceiling Mounting – This product should

be mounted to a wall or ceiling only as recommended

by the manufacturer.

17. Heat – This product should be situated away from

heat sources such as radiators, heat registers, stoves,

or other products that produce heat. Do not place a

 aming object, such as a candle or lantern, or near the

product.

18. Power Lines – An outside antenna system should

not be located in the vicinity of overhead power lines

or other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken

to keep from touching such power lines or circuits as

contact with them might be fatal.

19. Outdoor Antenna Grounding – If an outside

antenna or cable system is connected to the product, be

sure the antenna or cable system is grounded so as to

provide some protection against voltage surges and built-

up static charges. Article 810 of the National Electrical

Code, ANSI/NFPA 70, provides information with regard to

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna-

discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

ANTENNA

LEAD IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

GROUND CLAMPS

Notes:

1. Item 7 is not required except for grounded or

polarized equipment.

2. Item 19 complies with UL in the U.S.A.

M-505USB_EN_r12.indd 3M-505USB_EN_r12.indd 3 07.8.29 4:44:39 PM07.8.29 4:44:39 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood M-505 USB in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood M-505 USB

Kenwood M-505 USB User Manual - German, Dutch, French, Italian, Spanish - 120 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood M-505 USB Manual

Product: