Manual Kenwood M-420DAB - 2020 (page 34 of 100) (English, German, Dutch, French, Italian)

795403

Zoom out

Zoom in

1/100

Expanded DAB+ information

With DAB+, supplemental information is transmitted in addition to the music signal. This can be retrieved as follows.

Press the INFO button on the remote control to retrieve successively the following information:

• DLS (Dynamic Label Segment): Text information accompanying the programme, such as performer, song title,

album name etc. “NO DLS” is shown for stations which do not support DLS.

• Signal level: This is shown from left to right in the display using symbols.

The more symbols that are shown, the better is the reception.

• PTY (Programme Type):Thisindicatedtheclassicationofstationsaccordingtocategories,e.g.Pop,News,

Religion,Info,Classics,etc.

•Ensemblename,e.g.DRDeutschland

• Display of channel and frequency of the station assigned

• ERR XX: This information shows the error rate of the digital reception. This is also dependent on the signal level

and can also be used for orienting the antenna.

• XX K BPS: Display of station data rate, e.g. 80 kBit/s. The data rate can differ from station to station.

• DABPLUS:Indicatesthe“DAB+”receivingmode.

• Current time

• Current date

DAB+ menu functions

The

MENU button opens a menu in which different DAB+ functions can be set. You can scroll through the

menu using the TUN+ or TUN- buttons. The following functions can be set:

• FULL SCAN:Repeatedautomaticstationscan.ConrmthefunctionusingtheEnter button.

• MANUAL:Withthisyoucansetaspecicreceivingchannel.UsingtheEnter button,thefunctionisconrmed

and the display will show the station which is currently set with the corresponding frequency.

• Press the TUN+ or TUN- buttons to manually select another channel.

•ConrmselectionusingtheEnter button. Then the signal level will be shown in the display, another

press of the button will load the current ensemble.

• DRC (Dynamic Range Control): With this you can adjust the dynamic range, provided that this is supported

by the selected station. The available settings are“OFF”, “LOW” and “HIGH”. The selection is made with

the TUN+ or TUN- buttonsandconrmedwiththeEnter button.

• PRUNE: Invalid stations are deleted from the stations list with this. Select with the Enter buttons, Y/N

with TUN+ or TUN- andconrmwithEnter .

• SYSTEM: For customer service only!

Use of the FM radio

Press the DAB button on the remote control or the

4. 5 mm

27 .0 m m

5. 8 mm

4. 3 mm

button on the main device until “FM” appears on

the display.

Setting a FM station

• Press the TUN+ button on the remote control to increase the reception frequency.

• Press the TUN- button on the remote control to lower the reception frequency.

• If you hold down the TUN+ or TUN- buttons, an automatic station scan starts which stops at the

rststationwhichisfound.

• Press the Auto Tune button to start a station scan with automatic storage of the

stations which are found. A maximum of 20 stations will be stored in the order they were found.

• Press the or buttons on the remote control or on the main device to scroll through the

memory list. Memory spaces which are unassigned will be indicated with “EMPTY“.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood M-420DAB - 2020 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood M-420DAB - 2020 Manual

Product: