160248
5
Zoom out
Zoom in
Previous page
1/24
Next page
EN
5
Preparing the remote control unit
Operation
When the power cord is plugged in, standby
indicator is lit. The power turns ON by pressing
button on the remote control unit pointing at the
remote sensor. When the power comes on, press the
button you want to operate.
The supplied battery may have shorter live than ordinary
battery due to use during operation checks.
When the remote-controllable distance gets shorter than
before, replace the battery with a new one.
Placing the remote sensor in direct sunlight, or in direct
light from a high frequency  uorescent lamp may cause a
malfunction.
In such a case, change the location of the system installation
to prevent malfunction.
Loading batteries
Use two AAA”/“R3”-size batteries.
1 Remove the cover.
2 Insert batteries.
3 Close the cover.
Before applying power
Connections
Connecting the AM antenna
Set up the AM loop antenna, and then connect it to
AM ANT terminal on the back.
Place the antenna where AM broadcast can be
received.
For the FM antenna
Adjust the position of the FM antenna for the best
reception and  x it.
Speakers connection
1 Connect the right speaker to terminal marked
“R”, with the red wire to + and the black wire to
–.
2 Connect the left speaker to terminal marked “L,
with the red wire to + and the black wire to –.
Clip the stripped portion of the speaker wire as
shown.
For optimal sound performance, it is recommended to use
the supplied speakers.
Do not connect more than one speaker to any one pair of
+/– speaker terminals.
¤
CAUTION
Be sure to adhere to the following, or proper
ventilation will be blocked causing damage or
re hazard.
Do not place any objects impairing heat radiation onto
the top of the unit.
Leave some space around the unit (from the largest
outside dimension including projection) equal to or
greater than, shown below.
Top panel : 50 cm Back panel : 10 cm
¤
CAUTION
For Main Plug : Mains plug is used as the disconnect
device. It shall remain readily, operable and should not be
obstructed during intended use.
B60-5691-08_00_r6.indd 5B60-5691-08_00_r6.indd 5 07.9.11 6:22:07 PM07.9.11 6:22:07 PM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood m 303 usb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood m 303 usb in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood m 303 usb

Kenwood m 303 usb User Manual - German, Dutch, French, Italian, Spanish - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info