Switching the Monitor’s Picture [VS]
Touch the C part.
Each time the C part is touched the monitor’s picture
switches as follows:
Display Picture
"NAV" Navigation (During “NAV” set to “RGB” or
“AV IN1”)
"VD1" Video 1 (During “VD1” set to “AV-IN1”)
"VD2" Video 2 (During “VD2” set to “AV-IN2”)
"CAM" Video 3 (During “CAMERA/VIDEO” set to
“VD”)
For “NAV”, “VD” and “CAMERA/VIDEO” setting, refer to
<System Setup Screen> (Page 5).
You cannot view video pictures whilst the vehicle is moving. To
enjoy video pictures, find a safe place to park and engage the
parking brake.
Switching the Video Screen Mode [WD]
Touch the A part.
Each time the A part is touched the screen mode
switches as follows:
Display Setting
"FULL" Full screen mode
"ZOOM" Zoom screen mode
"JUST" Just screen mode
"NORMAL" Normal screen mode
You cannot operate when the navigation picture is displayed.
English - 7
Switching the Speaker Mode [SP]
Touch the B part.
Each time the B part is touched the built-in speaker
mode switches as follows:
Display Setting
"NORMAL" Sound with monitor picture
"NAV" Sound with navigation picture
"VIDEO1" Sound with video1 picture
"VIDEO2" Sound with video2 picture
"OFF" Switch off the built-in speakers
Setting the AV Output Mode [AV]
Touch the E part.
Each time the E part is touched the AV output mode
switches as follows:
Display Setting
"NORMAL" Picture/sound with monitor picture
"NAV" Navigation Sound
"VIDEO1" Picture/sound from <AV IN-1> terminal.
"VIDEO2" Picture/sound from <AV IN-2> terminal.
Exit the On Screen Mode
Touch the D part.
If you make no operation for 10 seconds, the On screen
control mode is automatically canceled.