795266

Kenwood LS-600BT Soundbar Manual

31
Zoom out
Zoom in
Previous page
1/90
Next page
13
6.5 BLUETOOTH mode
Switch on the Soundbar and briefly press the <STANDBY> button on the Soundbar or the <Input>
button on the remote control to switch the Soundbar to BLUETOOTH Mode. The LED indicator “bt”
on the Soundbar starts flashing in the BLUETOOTH-Pairing-Mode and you hear a series of tones.
• Switch on the BLUETOOTH on your device, search for “LS-600BT” in the BLUETOOTH and then
select the BLUETOOTH connection.
• If the pairing is successful, you will hear a tone and the “bt” indicator stops flashing. Then the
music on your telephone or another compatible device that you have selected can be played on the
Soundbar.
• Press and the hold the <PAIR> button on the remote control for longer than two seconds to
disconnect the connection to the paired BLUETOOTH device or to reconnect the previously
disconnected BLUETOOTH device.
• Control the playback using the <Playback/Pause>, <Skip track forwards> and <Skip track
backwards> buttons.
• Set the volume and the sound mode with the corresponding button on the remote control.
Please note:
The pairing process described above must not be repeated with the same device once paired. If the
connected device is switched off or manually disconnected, the Soundbar automatically switches to
the Pairing mode.
If the connected device is removed out of the range of the Soundbar (up to 10 meters), the
connection is disconnected and the Soundbar is successfully connected to the device as soon as it is
once again in within the range. To setup a connection with another device, repeat the above pairing
steps. If a BLUETOOTH was already connected, the Soundbar connects with the last connected
device. Disconnect this connection to connect a new device. There is no automatic shut-down in the
Pairing mode. The Soundbar remains in the Pairing mode even if no device is paired.
7. Maintenance and care
Cleaning the housing
Use a cloth lightly moistened with a mild detergent. Do not use detergents containing alcohol,
ammonia or scouring agents.
Cautions on condensation
Condensation (dew) may form inside the unit if there is a significant difference between the
temperature of the unit and the ambient temperature. If condensation occurs inside the unit, proper
function is no longer guaranteed. In this case, you have to wait a few hours; After the moisture has
dried, the device can be reused.
Special care should be taken in the following circumstances
When the unit is moved from one place to another at a much higher or lower temperature, or when
the humidity at the installation site increases, etc.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood LS-600BT Soundbar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood LS-600BT Soundbar in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info