795266
28
Zoom out
Zoom in
Previous page
1/90
Next page
10
5. Basic operation
5.1 Switching On / Off (standby)
Connect the Soundbar with the mains adapter, and plug in the latter into a mains socket.
Press the Standby button on the device or on the remote control to switch on the remote control.
Press the button again to put the device into standby mode. To switch it off completely, disconnect
the remote control from the power supply.
5.2 Adjusting the volume
Use the <VOL+> and <VOL-> buttons on the remote control or on the Soundbar. The volume
setting is displayed in the Display from 0 to 32, the factory set value is “10”. The audio playback can
be interrupted with the <MUTE> button, the “00” flashes on the Display. Another pressing of the
button restores the original volume. In the case of a power loss, the current volume remains stored.
5.3 Setting the sound
The Soundbar has four preset sound modes:
"MUSIC" / "MOVIE" / "NEWS" / "3D"
These can be selected with the relevant button on the remote control.
In addition, using the <TREB+> / <TREB-> and <BASS+> / <BASS-> buttons you set the treble and
the bass to your taste. The control range is from -5 to +5 in each case.
5.4 Source selection
The following input sources can be selected using the <INPUT> button:
HDMI (TV ARC) / Display “HD”
USB / Display “US” (can be selected only for inserted USB memory)
AUX / Display “AU”
BLUETOOTH / Display “bt”
OPTICAL / Display “OP”
Relevant detailed information available in Chapter 6.
6. Connection and usage
6.1 HDMI (TV ARC) Mode
The Soundbar supports HDMI with Audio Return Channel (ARC). Using a single HDMI cable you can
listen to the TV audio via your Soundbar. For this, however, your TV must be ARC compatible. For
further information refer to the manual of your TV.
HDMI TV (ARC)
HDMI TV (ARC)
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood LS-600BT Soundbar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood LS-600BT Soundbar in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info