Loading and Replacing the Batteries for the
Remote
Do not set the remote on hot places such as above
the dashboard.
1. Use two "AAA" batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
2. Insert the batteries with the ª and · poles
aligned properly following the illustration inside
the case.
Store unused batteries out of the reach of children.
Contact a doctor immediately if the battery is
accidentally swallowed.
• The provided batteries are intended for use in
operation checking, and their service life may be
short.
• When the remote controllable distance becomes
short, replace both of the batteries with new ones.
2 WARNING
2 CAUTION
Monitor Control Function
3 Switching the Monitor’s Picture
Press the [V.SEL] button.
Each time the button is pressed the monitor’s picture
switches.
3 Switching the AV Output Mode
Press the [AV OUT] button.
Each time the button is pressed the AV out mode
switches.
Source Control Function (Common operation)
3 Select the Audio Source Mode
Press the [SRC] button.
Each time the button is pressed the audio source
switches.
3 Volume
Increasing Volume
Press the [+] button.
Decreasing Volume
Press the [–] button.
3 Attenuator
Press the [ATT] button.
Each time the button is pressed the Attenuator turns
ON or OFF.
FM/AM Tuner Control Function
3 Selecting the FM band
Press the [FM+] button.
3 Selecting the AM band
Press the [AM–] button.
3 Tuning
Press the [4] or [¢] button.
3 Selecting the Seek Mode
Press the [ 38 ] button.
Each time the button is pressed it switches between
the AUTO1, AUTO2 and MANUAL seek mode.
3 Recalling Preset Station
Press the [1] – [6] button.
3 Direct Search
Press the [DIRECT/OK] button to switch the direct
search mode.
Press the [0] – [9] buttons and enter the
frequency.
Example:
Desired frequency Press button
92.1 MHz (FM) [#0], [#9], [#2], [#1]
810 kHz (AM) [#0], [#8], [#1], [#0]
2
1
