Manual Kenwood KVC50 Chef Sense (page 11 of 215) (All languages)

565572

Zoom out

Zoom in

1/215

To assemble

The splashguard assembly consists of 2

pieces: the head shield

and the

splashguard

The splashguard cannot be fitted to the

bowl unless the shield is fitted.

1 Raise the mixer head until it locks.

2 Clip the head shield upwards onto the

underside of the mixer head

until fully

located.

3 Fit the bowl onto the base.

4 Lower the mixer head.

5 Rest the splashguard on the bowl rim

and then slide forward until fully located

• During mixing, ingredients can be added

directly to the bowl via the feed chute.

6 To remove the splashguard simply slide it

away from the mixer bowl.

7 To remove the head shield, raise the

mixer head until it locks. Remove the tool

if fitted, then pull the head shield

downwards from the underside of the

mixer head.

Note: Only fit or remove the splashguard

when the mixer head is in the locked

position.

We recommend that the head shield

is removed regularly from the mixer

head for cleaning.

K-beater & Whisk

The tools are set to the correct height for

the bowl supplied in the factory and should

not require adjustment.

However, if you wish to adjust the tool use

a suitable sized spanner:

TYPE KVC50 = 17mm

TYPE KVL60 = 19mm

Then follow the instructions below:

1 Unplug the appliance.

2 Raise the mixer head and insert the

whisk or beater.

3 Lower the mixer head. If the clearance

needs to be adjusted, raise the mixer

head and remove the tool. Ideally the

whisk and K-beater should be almost

touching the bottom of the bowl

4 Using a suitable spanner loosen the nut

sufficiently to allow adjustment of the

shaft

. To lower the tool closer to the

bottom of the bowl, turn the shaft anti-

clockwise. To raise the tool away from

the bottom of the bowl turn the shaft

clockwise.

5 Re-tighten the nut.

6 Fit the tool to the mixer and lower the

mixer head. (Check its position see

points above).

7 Repeat the above steps as necessary

until the tool is set correctly. Once this is

achieved tighten the nut securely.

• Note: Spanner

shown is for

illustration purpose only.

Dough Hook

This tool is set at the factory and should

require no adjustment.

To fit and use your

Splashguard

Tool Adjustment

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KVC50 Chef Sense in the language / languages: All languages as an attachment in your email.

The manual is 4,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood KVC50 Chef Sense Manual

Product: