161383

Kenwood ktf 3010 Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
KTF-3010/KTF-2010 (En)
10
The AUTO MEMORY function automatically calls up only those stations which have RDS broadcasts for storing
(up to 40 stations can be stored).
1 Turn the TUNING/MULTI CONTROL knob.
AUTO MEMORY (Storing stations automatically in memory )
Storing broadcast stations in memory
HIGHBLEND
WIDE
NARROW
RFATT
TUNING
MODE
+10/CLEAR
1
ACTIVE
RECEPTION IF BAND
RF ATT
TA/NEWS
PTY/
PTY SCARCH
DISPLAY
ANT A
/
B
MEMORY
AM
-
FM STEREO SYNTHESIZER TUNER
KTF-3010
BAND
P. CALL
DOWN UP
TUNING/MULTI CONTROL
3456789
0/CHARA.
2
ON/STANDBY
R D S
EON
: Keys or controls to be used in this operation.
The figure shows an example for the KTF-3010
The automatic memory function allows you to store up to
40 stations using only one button.
The manual preset function allows you to store stations
one at a time.
Use the automatic memory function first.
MEMORY
1 Switch to FM band.
2 Press and hold the MEMORY key (for more than 2 seconds).
The tuner completes the scanning of frequencies in 5 minutes.
While scanning, "AUTO" and "MEMORY" are displayed in turn.
÷ Unless stations are stored with the automatic memory function, EON
reservation and PTY search will not work.
÷ AR will not work when the automatic memory function is on.
÷ Broadcast stations stored manually may be overwritten.
÷ Stations already stored in the preset memory may be replaced by RDS
stations. (i.e., If the RDS AUTO MEMORY function finds 15 RDS sta-
tions, the stations currently preset at numbers 01- 15 are replaced by
the RDS stations.)
÷ If the antenna is replaced, you will have to reset the automatic memory
function.
÷ Stored stations may be erased from the memory.
MANUAL PRESET(Storing stations one at a time)
1
Tune in the station to be preset
2
Press the MEMORY key
MEMORY
If you press the MEMORY key when the preset number dis-
played is "
- -
", the smallest unstored number appears.
3
Select one of the preset numbers from 1 to 40.
2 Select the desired station.
DOWN UP
TUNING/MULTI CONTROL
MEMORY
TUNED
AUTO
kHz
MHz
STEREOSTANDBY ANT A BMEMO
AR
1089))
AM
FM
Perform the operations in the five seconds that the display is blinking.
Lights (for 5 sec.)
(If more than 5 sec. have elapsed, press the MEMORY key again.)
TUNED
AUTO
MHz
STEREOANT AMEMO
AR
FM
51 9) )).
Blinks Lights (for 5 sec.)
The numbers 1 to 40 appear, in turn, as you turn the knob.
÷ Repeat steps 1 to 3 for each of the stations to be stored in memory.
÷ If a station is stored in a preset number which already stores a station
memory under it, the previous memory is replaced by the new memory
content.
÷ Once the memory content has been preset, it is held for about 3 days
even after the power cord is unplugged from the mains outlet.
÷ You cannot enter numbers over 40.
÷ If you make a mistake when pressing the 0 key, press the 0
key several times to return to the original display before re-entering.
÷ The stored station will be erased from the memory.
02
,
01
,
03 39
,
4038
,
Press the numeric keys (0 to 9, +10) in the
following order.
To select “15”...0,5
To select “20”...0,0, )
Instead of steps 1 and 2, you can use the numeric keys
(0~9,+10), to store the broadcast stations.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood ktf 3010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood ktf 3010 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info