67581
32
Zoom out
Zoom in
Previous page
1/40
Next page
32
English
Fine adjustment of the sound
You can make further adjustments to the sound while listening to
playback in the surround mode.
MULTI CONTROL
MULTI CONTROL
/O
SOUND
SPEAKERS ON/OFF
œ Press [SOUND] until the desired item appears on
the display.
Each time you press the key, the menu changes as
follows. Note that some items are not displayed
depending on speaker settings and listen mode.
Display Adjustment Range
"C" Center speaker level *
1
-10 – +10dB
"RS" Surround right speaker level *
1
-10 – +10dB
"LS" Surround left speaker level *
1
-10 – +10dB
"SW" Subwoofer level *
1
-10 – +10dB
"INPUT" Input level *
2
-6, -3, 0
"NIGHT" Midnight mode *
3
"ON", "OFF"
"PANORAMA" Panorama mode *
4
"ON", "OFF"
"DIMENSION" Dimension *
4
"CENTER WIDTH" Center width *
4
Input source name Exit the adjustment mode.
*
1
The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value
when the power is turned on/off or when the input selection is
changed.
*
2
Analog mode only
*
3
Dolby Digital and DTS mode only
*
4
Pro Logic II Music mode only.
Use the [MULTI CONTROL 5/] to adjust the
setting as desired.
Speaker level adjustmentSpeaker level adjustment
The output level from the desired speaker channels can be fine
adjusted according to the properties of each disc.
The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value
when the power is turned on/off or when the input selection is
changed.
œ Press [SOUND] repeatedly until the speaker to be
adjusted appears on the display. ("C", "RS", "LS", or
"SW")
Use the [MULTI CONTROL 5/] to adjust the level.
Input level adjustment (analog sources Input level adjustment (analog sources
only)only)
If the input level of an analog source signal is too high, the CLIP
indicator will blink to indicate. Adjust the input level.
œ Press [SOUND] repeatedly until "INPUT" appears
on the display.
Use the [MULTI CONTROL 5/] to adjust the level.
Midnight mode (Dolby Digital and DTS Midnight mode (Dolby Digital and DTS
mode only)mode only)
When watching movies at night, you might not be able to raise
the volume as loud as normal. Midnight mode compresses the
dynamic range of previously specified heavy sound passage of
the Dolby Digital and DTS mode sound track (like scenes with
sudden increases in volume) to minimize the difference in volume
between the scenes with heavy sound passage and scenes with
normal sound passage. This makes it easy to hear all of the sound
track, even when listening at low volumes.
œ Press [SOUND] repeatedly until "NIGHT" appears
on the display.
This can be selected only if "CD/DVD", "DVD/6CH" or
"VIDEO2" is selected as the source and the listen mode
is set to "DOLBY DIGITAL" or "DTS".
Use [MULTI CONTROL 5/] to select the "ON" or
"OFF" setting.
Some Dolby Digital or DTS software may not be compatible with
the Midnight mode.
Further adjustments
B60-5676-00_00.indd 32B60-5676-00_00.indd 32 07.4.12 9:57:42 AM07.4.12 9:57:42 AM
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KRF-V5200D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KRF-V5200D in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KRF-V5200D

Kenwood KRF-V5200D User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info