67581
18
Zoom out
Zoom in
Previous page
1/40
Next page
18
English
Speaker settings
Speaker setup ("SP SETUP")
This sets up the speakers according to the speaker system in
use. Speaker setup is required every time the speaker system is
changed.
œ See <Getting into the setup mode> (&) and
select "SP SETUP".
Use [MULTI CONTROL 5/] to select the subwoofer
setting.
Speaker Display Selection
Subwoofer
"SUBW ON" With Subwoofer
"SUBW OFF" Without Subwoofer
é Press [SETUP].
® Repeat steps é for the rest of the speaker
setting.
Speaker Display Selection
Front speaker
"FRNT LRG" Large size front speaker
"FRNT NML" Average size front speaker
Center speaker
"CNTR NML" Average size center speaker
"CNTR LRG" Large size center speaker
"CNTR OFF" No center speaker is connected.
Surround speaker
"SURR NML" Average size surround speaker
"SURR LRG" Large size surround speaker
"SURR OFF" No surround speaker is connected.
Subwoofer re-mix*
"RMX ON" Subwoofer re-mix is on.
"RMX OFF" Subwoofer re-mix is off.
* The function for adding the bass of other channels to the
subwoofer channel according to the speaker setup.
Go to the next setting, "TEST TONE".
If you wish to exit the setup mode, see <To exit the setup mode>
&.
Notes:
When "SUBW OFF" is selected, the front speakers are
automatically set to "FRNT LRG".
For "FRNT LRG" selection, no sound will be heard from subwoofer
even it is set to ON. However, if you select "RMX ON", you will be
able to hear sound from the subwoofer.
When in STEREO mode, the sound goes directly to front speakers.
If "FRNT NML" is selected, "CNTR LRG" cannot be selected.
If "CNTR NML" or "CNTR OFF" is selected, "SURR LRG" cannot be
selected.
Adjusting the speaker level
("TEST TONE")
From your usual listening position, adjust the volume output of
each speaker. The output level from each speaker should be the
same.
œ See <Getting into the setup mode> (&) and
select "TEST TONE".
Use [MULTI CONTROL 5/] to select either "AUTO"
or "MANUAL".
Display Selection
"AU TO "
The test tone is heard from the speakers one after another with
2 seconds each.
"MANUAL" The test tone is heard from the speaker you have selected.
é Press [SETUP].
® Adjust the output level.
If you select "AUTO":
When you hear the test tone from the speaker which
you wish to adjust, use [MULTI CONTROL 5/] and
adjust the volume of the test tone. When you finish
adjusting, press [SETUP].
If you select "MANUAL":
Use [MULTI CONTROL 5/] to adjust the volume of
the test tone and press [SETUP]. You will hear the
test tone from the next speaker.
Go to the next setting, "DISTANCE".
If you wish to exit the setup mode, see <To exit the setup mode>
&.
B60-5676-00_00.indd 18B60-5676-00_00.indd 18 07.4.12 9:57:19 AM07.4.12 9:57:19 AM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KRF-V5200D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KRF-V5200D in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KRF-V5200D

Kenwood KRF-V5200D User Manual - German - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info