34767

Kenwood KRC-PS959R Manual

29
Zoom out
Zoom in
Previous page
1/46
Next page
— 29 —
Other features (See page 7)
Audio Control Setting
Adjust various parameters of sound quality.
Press the AUD button to enter the control mode.
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
▼
Bass High-pass filter (rear)
▼▲
Treble High-pass filter (front)
▼▲
Balance N-F Level (only when being switched)
▼▲
Fader
Source tone memory
Each source (tape, FM, AM, and disc changer) has its own
memory in which to store the bass and treble tone settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Press the AUD button to end the control mode.
Setting the high-pass filter
You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter works except
during non- fading preout when switching to non-fading.
The factory default settings for front output and rear output are
"through".
NOTE
4
3
NOTE
2
1
Table of Audio Control Setting
Bass
(“BAS”)
Treble
(“TRE”)
Balance
(“BAL”)
Fader
(“FAD”)
Non-Fading
Preout Level
(“NF”)
Bass decreased.
Treble decreased.
Left channel
emphasized.
Rear channel
increased.
The front and rear
sound is emphasized.
Bass increased.
Treble increased.
Front channel
increased.
The non-fading sound is
emphasized.
Right channel
emphasized.
Adjustment
mode
(Display)
4 button
¢ button
Operation of Audio control button
High-pass
filter for front
output
(“HPF F”)
You can select the frequency to be cut, as
follows:
THROU (through) ↔ 40Hz ↔ 60Hz ↔ 80Hz ↔
100Hz ↔ 120Hz ↔ 150Hz ↔ 180Hz ↔ 220Hz
High-pass
filter for rear
output
(“HPF R”)
You can select the frequency to be cut, as
follows:
THROU (through) ↔ 40Hz ↔ 60Hz ↔ 80Hz ↔
100Hz ↔ 120Hz ↔ 150Hz ↔ 180Hz ↔ 220Hz
KRC-PS959R,859R/C/W only
(KRC-PS959R,859R/C/W only)
(KRC-PS959R,859R/C/W only)
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KRC-PS959R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KRC-PS959R in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info