7873

Kenwood KRC-877W Manual

30
Zoom out
Zoom in
Previous page
1/48
Next page
Press the AUD button to end the control mode.
Setting the high-pass filter
You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter works except
during non- fading preout when switching to non-fading.
The factory default settings for front output and rear output are
"through".
NOTE
4
Adjustment mode
(Display;
KRC-PS1077R, 977R/
KRC-877R, 877W, 777R)
Bass
("Bass/Bas")
Treble
("Treble/Tre")
Balance
("Balance/Bal")
Fader
("Fader/Fad")
Non-Fading
Preout Level
("NF pre Level/
NFLevel")
Bass decreased.
Treble decreased.
Bass increased.
Treble increased.
4 button ¢ button
Operation of Audio control button
Low-pass filter
for Non-fading
output
("LPF NF pre/
LPF NF")
High-pass filter
for front output
("HPF Front/
HPF F")
High-pass filter
for rear output
("HPF Rear/
HPF R")
Phase for Non-
fading output
("NF pre Phase/
NF Phase")
You can select the frequency to be cut, as
follows:
50Hz ↔ 80Hz ↔ 120Hz ↔
Through/Throu (through)
You can select the phase for non-fading output,
as follows:
Normal (0°) ↔ Reverse (180°)
Front and rear
channels (including
preout) emphasized.
You can select the frequency to be cut, as
follows:
Through/Throu (through) ↔ 40Hz ↔ 60Hz ↔ 80Hz
↔ 100Hz ↔ 120Hz ↔ 150Hz ↔ 180Hz ↔
You can select the frequency to be cut, as
follows:
Through/Throu (through) ↔ 40Hz ↔ 60Hz ↔ 80Hz
↔ 100Hz ↔ 120Hz ↔ 150Hz ↔ 180Hz ↔
Non-fading sound
emphasized.
Front channel increased.
Rear channel increased.
Right channel emphasized.
Left channel
emphasized.
Adjust various parameters of sound quality.
Press the AUD button to enter the control mode.
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Source tone memory
Each source (tape, FM, AM, and disc changer) has its own
memory in which to store the bass, treble and N-F level settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
3
NOTE
Bass
Rear High-pass filter*
1
N-F Low-pass filter*
1,2
Treble
Front High-pass filter*
1
Balance
N-F Level*
1,2
N-F Phase*
1,2
Fader
KRC-777R:
*
1
None
KRC-PS1077R/977R/877R/877W:
*
2
Not available during the Dual zone system on.
/
Only when Non-fading is switched on.
2
1
Audio Control Setting
Other features
— 30 —
English
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KRC-877W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KRC-877W in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info