5274
38
Zoom out
Zoom in
Previous page
1/44
Next page
English
— 38 —— 38 —
? The Mask Key item isn’t displayed in the Menu System.33
The Mask Key function is already activated.
When the Mask Key function is activated it isn’t displayed in the
menu items.
? The Touch Sensor Tone doesn’t sound.34
The preout jack is being used.
The Touch Sensor Tone can’t be output from the preout jack.
? Even though Synchronize Clock is ON, the clock can’t be adjusted.35
The received RDS station isn’t sending time data.
Receive another RDS station.
? Even though the vehicle light switch is turned ON, the unit’s display
won’t dim.36
The dimmer wire isn’t connected.
Connect the dimmer wire correctly.
? The Dimmer function doesn’t work. 38-1
The Dimmer wire isn’t connected correctly.
Check the Dimmer wire connection.
? The display color changes subtly. 38-2
This is because thetemperature is different than the temperature
when the setting was done.
The display color condition changes subtly according.to the
ambient temperature.
Tuner source
? Radio reception is poor.39
The car antenna is not extended.
Pull the antenna out all the way.
The antenna control wire is not connected.40
Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
? The desired frequency can’t be entered with the Direct Access
Tuning.41
A station that can’t be received is being entered.
Enter a station that can be received.
You’re trying to enter a frequency with a 0.01 MHz unit.42
What can be designated in the FM band is to 0.1 MHz.
? It isn't the set Traffic information sound volume. 43
The set sound volume is less than the tuner sound volume.
If the tuner sound volume is louder than the set sound volume,the
tuner sound volume is used.
Cassette tape source
? Can’t remove tape.44
The cause is that more than 10 minutes has elapsed since the vehicle
ACC switch was turned OFF.
The tape can only be removed within 10 minutes of the ACC
switch being turned OFF. If more than 10 minutes has elapsed,
turn the ACC switch ON again and press the Eject button.
? The DPSS, Tape Advance and Music Repeat don’t operate
correctly.45
The space between the songs on the tape can’t be recognized
because it’s too short.
Have at least 4 seconds between songs.
The space between songs can’t be recognized because there’s too
much noise between songs.46
Reduce the noise between songs.
? The blank skip doesn’t work.47
Because noise is too loud, the non-recorded part can’t be recognized.
Reduce the noise between songs.
? Blank Skip functions at places that are recorded.48
Because the recording level is low, it’s recognized as not recorded.
Turn Blank Skip OFF.
Disc source
? "AUX" is displayed without achieving External disc control mode.50
O-N switch is set to "O" side.
Set the switch to "N" side.
Unsupported disc changer is connected.51
Connect the supported disc changer. (page 3)
Troubleshooting Guide
KRC-794_U.S 03.1.17 3:34 PM Page 38
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KRC-791 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KRC-791 in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KRC-791

Kenwood KRC-791 User Manual - German - 41 pages

Kenwood KRC-791 User Manual - Dutch - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info