35988

Kenwood KRC-778R Manual

13
Zoom out
Zoom in
Previous page
1/48
Next page
Recalling your sound settings:
Press a preset button (#1-6) except during the bass center
frequency, bass level, bass quality factor, bass extension,
treble center frequency, and treble level adjust mode.
This mode is available only when Sound coordinate system is on.
(page33)
NOTE
Storing your sound settings:
Hold down a preset button (#1-6) for two seconds or more.
• This setting can be made only when the Sound coordinate
system is on.( page33)
• The settings you can preset are, bass centre frequency, bass
level, bass quality factor, bass extension, treble centre
frequency, and treble level.
NOTE
"V OFFSET" : Set the sound level of the each source selected by
adjusting the level difference between the basic
sound level and the required level.
Setting values: - 8 – 0
Function of the KRC-PS978R/KRC-878R
"NF PHS" : Adjust the phase for Non-Fading output.
Setting values: NOR (0°) / RVE (180°)
• This mode is available only when the non-fading output function
is set to on.( page9)
• Not available during the Dual zone system is on.
NOTE
Function of the KRC-PS978R/KRC-878R
"LPF" : Adjust the frequency of the Low-pass filter for Non-
Fading output.
Setting values: 50 Hz / 80 Hz / 120 Hz / Through
Function of the KRC-PS978R/KRC-878R
"HPF R" : Adjust the frequency of the High-pass filter for rear
output.
Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /
150Hz / 180Hz / 220Hz
• You can separately set the high-pass filter for front and rear
output, including preouts.
• The high-pass filter does not affect the non-fading preout
(KRC-PS978R only).
• The high-pass filter works except during non-fading preout
when switching to non-fading.(KRC-878R only)
• The factory default settings for front output and rear output are
"Through" .
NOTE
Function of the KRC-PS978R/KRC-878R
"HPF F" : Adjust the frequency of the High-pass filter for front
output.
Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /
150Hz / 180Hz / 220Hz
• You can separately set the high-pass filter for front and rear
output, including preouts.
• The high-pass filter does not affect the non-fading preout
(KRC-PS978R only).
• The high-pass filter works except during non-fading preout
when switching to non-fading.(KRC-878R only)
• The factory default settings for front output and rear output are
"Through" .
NOTE
— 13 —
• This mode is available only when the non-fading output function
is set to on.( page9)
• Not available during the Dual zone system is on.
NOTE
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KRC-778R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KRC-778R in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info