165462

Kenwood krc 377 kdc c712 Manual

30
Zoom out
Zoom in
Previous page
1/40
Next page
–
+
–
+
–
+
–
+
–
+
FRONT • L
FRONT • R
REAR • L
REAR • R
FRONT
P.CONT.OUT
ANT.
CONT.
Rear right output (Red)
Rear left output (White)
Front left output (White)
(KRC-477R only)
Front right output (Red)
(KRC-477R only)
KENWOOD disc changer
/ DAB control input
FM/AM antenna
input
Antenna Cord (ISO)
Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
To connect the Disc changer or
DAB unit, consult each manual.
NOTE
Wiring harness
(Accessory1)
TEL mute terminal
Fuse (10A)
Plug (P.32)
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left
speaker
To front right
speaker
To rear right
speaker
To rear left
speaker
To connect the KENWOOD
navigation system, consult
your navigation manual.
NOTE
When only two speakers are being connected to
the system, connect the connectors either to both
the front output terminals or to both the rear
output terminals (do not mix front and rear). For
example, if you connect the + connector of the
left speaker to a front output terminal, do not
connect the - connector to a rear output
terminal.
2CAUTION
If you connect the ignition cable (red) and the
battery cable (yellow) to the car chassis
(ground), you may cause a short circuit, that in
turn may start a fire. Always connect those
cables to the power source running through
the fuse box.
2WARNING
Ignition cable (Red)
Battery cable (Yellow)
Ground cable (Black) - (To car chassis)
Ignition key
switch
Car fuse
box
(Main
fuse)
ACC
Car fuse box
Battery
Power control/ Motor antenna
control cable (Blue/White)
Connect either to the power control terminal
when using the optional power amplifier, or to
the antenna control terminal in the vehicle.
If no connections are made, do not cut the tube off from
the edge of the cable.
English
— 30 —
Connecting Cables to Terminals
ISO connector unsupported car (KRC-477R/377R/32R only)
■
Power Control terminal
(P31)
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood krc 377 kdc c712 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood krc 377 kdc c712 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info