Manual Kenwood KRC-159RG (page 14 of 30) (English)

35994

Zoom out

Zoom in

1/30

RDS features (See page 6)

English

— 14 —

Presetting Volume for Traffic Information/News

Preset the volume level to be used for traffic information and

news broadcasts.

Tune into the station for which you want to set the volume.

Adjust the volume to the desired level.

Hold down the VOL ADJ button for two seconds or more.

The volume level blinks once in the display to indicate that the

data has been stored.

Future traffic information/news broadcasts are heard at the

preset level.

• The volume cannot be lowered by this function during tuner

reception. The volume is only set when it is louder than the lis-

tening volume of the tuner.

• You can arrange only to listen to traffic information or news bul-

letins with at preset volume with the volume set at minimum.

NOTE

News Bulletin Function

with PTY News Timeout Setting

You can arrange to have news bulletins interrupt your current

listening source, including other radio stations. When the

News Bulletin function is on, the PTY News Timeout setting

allows you to set the interval during which further news inter-

ruption cannot take place. You can adjust the PTY news inter-

ruption period from 10 to 90 minutes for each journey.

Turning News Bulletin Function On/Off:

Hold down the MENU button for one second or more.

"MENU" is displayed and the menu mode is turned on.

Press the ¢ button repeatedly until the News Bulletin func-

tion appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "NEWS 00M" or "NEWS

OFF" in the display, indicating that the function is on or off,

respectively.

Depending on the interval chosen, the "00M" in the display will

change when the function is turned on.

Changing the Function Setting

Press either the FM or AM button.

Each time you press the FM or AM button until the desired

setting is displayed.

Press the FM button to increase the interval, and the AM but-

ton to decrease it.

OFF ↔ 00M ↔ 10M ↔ 20M ↔ 30M ↔ 40M ↔ 50M ↔ 60M

↔ 70M ↔ 80M ↔ 90M (M= minutes)

When you select the news interruption timeout interval, the

News function turns on and the NEWS indicator lights up.

When a news bulletin is received, the NEWS indicator will blink

and reception will begin at the preset volume.

If you choose the "20M" setting, further news bulletins will not be

received for 20 minutes once the first news bulletin is received.

Setting the interval at the "00M" factory default indicates no

News Timeout will be made, meaning that additional news bul-

letins will continue to be searched for.

Press the MENU button to end the menu mode.

• This function is only available if the desired station sends PTY-

code for news bulletin or belongs to EON-Network sending

PTY-code for news bulletin.

• If you turn on the news bulletin function in the MW/LW band,

the band is switched automatically to the FM band.

However, the MW/LW band is not returned to when you turn

off the function.

NOTE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KRC-159RG in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood KRC-159RG Manual

Product: