168888
15
Zoom out
Zoom in
Previous page
1/28
Next page
English
|
15
Audio Preset Memory
Registering the values setup within Sound Controls.
These settings cannot be erased by the Reset
button.
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 14)
- <Adjusting the detail of Audio Control> (page 14)
- <Audio Setup> (page 14)
2 Select Audio Preset item
Select the Audio Preset” display.
For how to select Menu items, refer to <Menu
System> (page 8).
3 Enter Audio Preset mode
Press the [ENTER] button for at least 1 second.
“Recall” is displayed.
4 Select the Audio Preset Memory
Turn the [VOL] knob.
Select the “Memory display.
5 Determine whether to put the Audio Preset in
the memory
Press the [ENTER] button.
“Memory?” is displayed.
6 Put the Audio Preset in the memory
Turn the [VOL] knob to select YES”, and then
press the [ENTER] button.
“Memory Completed” is displayed.
7 Exit Audio Preset mode
Press the [ ] button.
The memory only holds one audio setting and not
settings for each source.
The following items cannot be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
Audio Preset Recall
Recalling the sound setup registered by <Audio
Preset Memory> (page 15).
1 Select the source
For how to select source item, refer to <General
function> of <Basic Operation> (page 6).
2 Select Audio Preset item
Select the Audio Preset” display.
For how to select Menu items, refer to <Menu
System> (page 8).
3 Enter Audio Preset mode
Press the [ENTER] button for at least 1 second.
4 Select the Audio Preset Recall
Turn the [VOL] knob.
Select the “Recall” display.
5 Determine whether to recall the Audio Preset
Press the [ENTER] button.
“Recall?” is displayed.
6 Recall the Audio Preset
Turn the [VOL] knob to select YES”, and then
press the [ENTER] button.
“Recall Completed” is displayed.
7 Exit Audio Preset mode
Press the [ ] button.
The User memory of “System Q” in <Audio Control>
(page 14) is changed to the value which was recalled.
The source tone memory item of <Audio Control> (page
14) is changed to the value which was recalled by the
selected source.
4 Adjust the Audio setup item
Press the [ ] or [ ] button.
5 Exit Audio Setup mode
Press the [ENTER] button.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood kmr 700u at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood kmr 700u in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood kmr 700u

Kenwood kmr 700u User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info