606323
24
Zoom out
Zoom in
Previous page
1/45
Next page
24
|
KDC-X494/ KDC-MP445U/ KMR-440U
HD Radio™ tuner control
Function of KTC-HR300/ KTC-HR200 (Optional Accessory)
Tuning
Selecting the station.
1 Select HD Radio source
Press the [SRC] button.
Select the “HD RADIO display.
For how to select source item, refer to <Power and
source selection> (page 4).
2 Select the HD FM band
Push the Control knob towards up.
Switches between the FM1, FM2, and FM3 bands
each time you push towards up.
Select the HD AM band
Push the Control knob towards down.
3 Tune up or down program
Push the Control knob towards right or left.
If the sub channel is available in Digital FM
broadcast when 37 Seek Mode of <Function
setting> (page 16) is set to Auto seek or Manual, the
channel can be switched.
Example:
(HD FM band)
Analog FM 1
Digital FM 2Analog FM
Digital FM-1ch 3Analog FM £
Digital FM-2ch 4
Digital FM-8ch 0
Digital FM !
<Tuning Mode> : Auto seek or Manual
<Receive Mode> : Auto mode
[4]
[¢]
During the reception of 1, tune up:
234
During the reception of !, tune down: !0
By using the 39 Receive mode of <Function setting>
(page 16) the modes can be switched to digital broadcast
automatic switching, analog broadcast only, or digital
broadcast only.
When “Digital” has been set with “Receive Mode”, the
seek time will be longer to allow a check of whether the
transmission is a digital broadcast.
It will take few seconds to receive the digital broadcasting
after selecting the frequency.
When Tuning up, it will switch to the next frequency if it is
switched before receiving a Digital broadcast. (£)
When Tuning down, it will received an Analog broadcasting
if a Digital broadcast is not received. (!£)
Station Preset Memory
Putting a station in the memory.
1 Select the frequency to put in the memory
Push the Control knob towards right or left.
2 Enter Preset Memory mode
Press the [ ] button.
“LIST & MEMORY” is displayed.
3 Select the number to put in the memory
Turn the Control knob.
4 Determine the number to put in the memory
Press the [ENTER] button for at least 2 seconds.
Cancelling the Preset Memory mode
Press the [ ] button.
Preset Tuning
Recalling the stations in the memory.
1 Enter Preset Tuning mode
Press the [ ] button.
2 Select a desired station in the memory
Turn the Control knob.
3 Recall the station
Press the [ENTER] button.
Cancelling Preset Tuning
Press the [ ] button.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KMR-440U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KMR-440U in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KMR-440U

Kenwood KMR-440U User Manual - English, German - 94 pages

Kenwood KMR-440U User Manual - German - 41 pages

Kenwood KMR-440U User Manual - Dutch - 94 pages

Kenwood KMR-440U User Manual - Dutch - 41 pages

Kenwood KMR-440U User Manual - French, Italian, Portuguese, Spanish - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info