672767
26
Zoom out
Zoom in
Previous page
1/116
Next page
22
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
SUBWOOFER SET ON
:Turns on the subwoofer output.;
OFF
:Cancels.
FADER
(Not applicable if 3-way crossover is selected.)
R15
to
F15
(
0
):Adjusts the rear and front speaker output balance.
BALANCE L15
to
R15
(
0
):Adjusts the left and right speaker output balance.
VOLUME OFFSET LEVEL –15
to
LEVEL +6
(
LEVEL 0
):Preset the initial volume level of each source. (Before
adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND RECNSTR
(Sound
reconstruction)
(Not applicable for RADIO source, DIGITAL AUDIO source and AUX source.)
ON
:Creates realistic sound by compensating the high-frequency components and restoring
the rise-time of the waveform that are lost in audio data compression.;
OFF
:Cancels.
SPACE ENHANCE
(Not applicable for RADIO source and DIGITAL AUDIO source.)
SMALL
/
MEDIUM
/
LARGE
:Virtually enhances the sound space.;
OFF
:Cancels.
SND REALIZER LEVEL1
/
LEVEL2
/
LEVEL3
:Virtually makes the sound more realistic.;
OFF
:Cancels.
STAGE EQ LOW
/
MIDDLE
/
HIGH
:Virtually adjust the sound position heard from the speakers.;
OFF
:Cancels.
DRIVE EQ ON
: Boosts the frequency to reduce the noise heard from outside the car or running noise
of the tyres.;
OFF
:Cancels.
SPEAKER SIZE
Depending on the crossover type you have selected
( 5)
, 2-way crossover or 3-way
crossover setting items will be shown.
( 23)
By default, 2-way crossover type is selected.
X’OVER
DTA SETTINGS
For settings,
24, Digital Time Alignment settings
.
CAR SETTINGS
For 2-way crossover:
[SUB-W LEVEL]
/
[SUBWOOFER SET]
is selectable only if
[SWITCH PREOUT]
is
set to
[SUBWOOFER]
.
( 4)
[SUB-W LEVEL]
is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
Crossover settings
Below are the available setting items for 2-way crossover
and 3-way crossover.
SPEAKER SIZE
Selects according to the connected speaker size for
optimum performance.
The frequency and slope settings are automatically set
for the crossover of the selected speaker.
When 2-way crossover is selected, if
[NONE]
is selected
for
[TWEETER]
of
[FRONT]
,
[REAR]
and
[SUBWOOFER]
for
[SPEAKER SIZE]
, the
[X ‘ OVER]
setting of the speaker is not
available.
When 3-way crossover is selected, if
[NONE]
is selected
for
[WOOFER]
of
[SPEAKER SIZE]
, the
[X’OVER]
setting of
[WOOFER]
is not available.
X ‘ OVER
• [FRQ]
/
[F - HPF FRQ]
/
[R - HPF FRQ]
/
[SW LPF FRQ]
/
[HPF FRQ]
/
[LPF FRQ]
: Adjusts the crossover frequency for the
selected speakers (high pass filter or low pass filter).
If
[THROUGH]
is selected, all signals are sent to the
selected speakers.
[F - HPF SLOPE]
/
[R - HPF SLOPE]
/
[SW LPF SLOPE]
/
[HPF SLOPE]
/
[LPF SLOPE]
/
[SLOPE]
:
Adjusts the crossover slope.
Selectable only if a setting other than
[THROUGH]
is
selected for the crossover frequency.
[SW LPF PHASE]
/
[PHASE]
:
Selects the phase of the speaker
output to be in line with the other speaker output.
• [GAIN LEFT]
/
[GAIN RIGHT]
/
[F - HPF GAIN]
/
[R - HPF GAIN]
/
[SW LPF GAIN]
/
[GAIN]
: Adjusts the output volume of the
selected speaker.
JS_KWD_KMM_BT504DAB_EN_EN_1.indd 22JS_KWD_KMM_BT504DAB_EN_EN_1.indd 22 9/26/2017 2:19:19 PM9/26/2017 2:19:19 PM
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KMM-BT504DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KMM-BT504DAB in the language / languages: English, German, Italian as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KMM-BT504DAB

Kenwood KMM-BT504DAB User Manual - Dutch, French, Spanish - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info