41247

Kenwood KMD-PS971R Manual

34
Zoom out
Zoom in
Previous page
1/50
Next page
The following operation allows separate sound sources to
control the output of the front and rear speakers. The Dual
zone system can only be switched on or off when the source is
set to the AUX mode.
Display and setting:
"Zone 2 ON" : The dual zone system function is on.
"Zone 2 OFF" : The dual zone system function is off.
NOTE
Dual Zone System
You can set the interval during which the open control panel
cannot reverse to be hidden. During the period you have set,
the faceplate can be removed from the faceplate bracket.
Display and setting:
"OFF WAIT" : 0sec / 3sec / 5sec / 10sec / 15sec / 20sec /
25sec (sec=sec.)
If you do not slide the faceplate lock switch during the period
which you have set, the unit’s power turns off after the control
panel is automatically hidden.
NOTE
Time setting for removing the faceplate
Display and setting:
"BLACK MASK ON" : The display will be shown in horizontally
divided mode. When this function is
enabled, the dual display mode is entered
and ••• (MD-IN) indicator is displayed.
Clock alone is displayed in the lower part.
"BLACK MASK OFF" : The display will turn on by using the
whole part of the display.
This function cannot be set in the full-screen display and
horizontal division display.
NOTE
This function allows you to turn off the graphic part of the
display if there is too much information in the display.
Black Mask
You can turn the movement of graphic display on and off.
The initial setting is ON.
Display and setting:
"Graphic ON" : The graphic display works.
"Graphic OFF" : The graphic display does not work.
Switching Graphic Display
You can dim the display.
The dimmer function is not available for units if the dimmer cable
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on.
"Dimmer OFF" : The dimmer setting is off.
NOTE
Dimmer
You can adjust the brightness level of the unit separately when
your car's light switch has been turned on or off.
Display and setting:
"Bright 0" – "Bright 10"
The initial setting value whilst your car's light switch is turned on
is "5" , and whilst the light is turned off is "10" .
NOTE
Brightness level adjustment
Menu settings
— 34 —
English
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KMD-PS971R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KMD-PS971R in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KMD-PS971R

Kenwood KMD-PS971R User Manual - English - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info