— 37 —
Connecting Cables to Terminals
Front left output (White)
Front right output (Red)
Rear right output (Red)
Rear left output (White)
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A–4
A–5
A–6
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Orange/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Rear Right (
+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
KENWOOD disc changer/DAB control input
Battery cable (Yellow)
Ignition cable (Red)
FM/AM antenna input
Antenna Cord (ISO)
Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
To connect the Disc changer or DAB unit, consult each manual.
NOTE
Wiring harness
(Accessory1)
If no connections are made,
do not let the cable come
out from the tab.
NOTE
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector B
Fuse (10A)
Connector A
TEL mute cable (Brown)
To connect the KENWOOD navigation
system, consult your navigation manual.
NOTE
Display Data Output Jack
Outputs data representing the unit's current state,
causing it to appear in the external display.
To connect to this jack, a converting adapter (optional) is
necessary.
External amplifier control cable
(Pink / Black)
To "EXT.AMP.CONT." terminal of the
amplifier having the external amp
control function.
Non-fading left output (White)
Non-fading right output (Red)
DC/DC converter box
(Wrap the cushion
(accessory9) around this box.)
Separate this box from the
unit and antenna cords. If
they are too close, it may
cause the reception to get
noise.
2CAUTION
Power control cable
(Blue/White)
When using the optional power amplifier,
connect to its power control terminal.