— 19 —
Playing MDs:
A press of the release button causes the faceplate to drop to
the front, thereby exposing the MD slot.
Insert the MD in the proper orientation. The MD will start
playing. Push back on the right side of the faceplate with your
hand until it locks.
The ¢ indicator will light when an MD has been inserted.
When inserting an MD, make sure the MD has been completely
drawn in before pushing back the faceplate. Failing to do so
might deform the MD.
Playing MDs Already Inserted:
Press the SRC button repeatedly until the MD mode is
obtained.
"MD" is displayed when the MD mode has been selected.
The MD will start playing.
Pausing and Restarting MD Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
Eject:
Press the release button and drop
open the faceplate.
Press the 0 button located near
the MD slot.
The MD stops playing and ejects
from the slot.
Push back on the right side of the
faceplate with your hand until it
locks.
• When the faceplate has been dropped open, it might interfere
with the shift lever or something else. If this happens, pay
attention to safety and move the shift lever or take an
appropriate action, then operate the unit.
• Do not apply excessive force to the open faceplate or place
objects on it. Doing so will cause damage or breakdown.
2CAUTION
2CAUTION
Playing MDs
• Do not use the unit with the faceplate in the open condition.
Doing so will cause breakdown.
Disc control features
(See page 6)
