565577

Kenwood KM086 Manual

9
Zoom out
Zoom in
Previous page
1/164
Next page
ᕢ
ᕤ
the mixer
t
he mixing tools and some of their uses
K
-beater
●
F
or making cakes, biscuits, pastry, icing, fillings, éclairs and mashed
potato.
whisk
●
For eggs, cream, batters, fatless sponges, meringues, cheesecakes,
mousses, soufflés. Don’t use the whisk for heavy mixtures (e.g. creaming
f
at and sugar) - you could damage it.
d
ough hook
●
F
or yeast mixtures only.
high temperature flexible beater
●
Suitable for many cooking operations in particular cooking custards,
scrambled eggs and sauces. Ideal for scraping mixes both hot and cold
from the sides of the bowl during mixing. Also suitable to sauté vegetables.
s
tirring tool
●
S
uitable to use during cooking to maintain the consistency of food
e.g. chicken, fish, vegetables and fruit.
to use your mixer
B
efore using the mixer ensure the temperature and speed controls are
switched to the off ‘O’ positions.
1 Turn the head-lift lever clockwise
ᕡ and raise the mixer head until it locks.
to fit a tool 2 Place the tool in the socket, locating the shaft pin in the groove and then
turn to lock into position ᕢ.
s
tirring tool - to fit the stirring tool, insert the shaft into the socket, then
line up the slot on the extension so that it is located beneath the metal pin on
the underside of the mixer head. Hold the paddle and turn so that the shaft
pin is below the groove then push up and turn to lock into position
ᕣ.
3 Fit the bowl onto the base - press down and turn clockwise ᕤ.
4 To lower the mixer head, raise it slightly, then turn the head lift lever clockwise.
Lower into the locked position.
to remove a tool
●
Reverse step 2 above. (Always use oven gloves to remove tools after
cooking).
5 Connect the mixer to the power supply. The speed and temperature
indicator lights will illuminate briefly. The display will show and then
clear leaving the power on indicator illuminated .
6 Turn the speed control to the desired setting
(see page 10 for recommendations), the mixer will start and the speed
control indicator light will flash. The timer will count up in 1 second intervals.
The speed can be changed at any time whilst the mixer is operating.
7 Stop the mixer by returning the speed control to the off ‘O’ position.
Important - If at any time, the mixer head is raised during an operation,
the mixer will automatically stop and beep and it will not re-start when the
mixer head is lowered. To re-start the mixer turn the speed control to the
off ‘O’ position and then re-select a speed.
pulse button
The pulse button can only be used when the speed control is in the off ‘O’
position.
To select pulse, press the pulse button and the mixer will run at maximum
speed for as long as the button is held in this position. If the bowl contents
are above 60°C, the speed will increase gradually. This will be accompanied
by a beeping sound and the speed and temperature indicator lights will flash
quickly.
fold button
Press and release the fold button and the mixer will automatically
operate on minimum speed for 2 revolutions and then stop. The button
can be pressed for a longer operation or pressed repeatedly as needed to
combine ingredients.
Note: If the fold button is pressed whilst the motor is running it will perform
the standard fold function and then return to the selected speed.
P
9
ᕡ
ᕣ
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KM086 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KM086 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info