463528
15
Zoom out
Zoom in
Previous page
1/19
Next page
cleaning and service
c
are and cleaning
Always switch off and unplug before cleaning.
A little grease may appear at outlet when you first use
it. This is normal - just wipe it off.
T
he metal surfaces of the temperature sensors may show signs of wear
d
uring normal use. this does not affect the performance of the product.
Do not leave the high temperature flexible beater fitted to the mixer
when not in use.
a
ppliance, outlet covers
W
ipe with a damp cloth, then dry.
Never use abrasives or immerse in water.
high temperature flexible beater
Always remove the flexible wipers after use for cleaning and
storage: Firmly pull and twist each wiper until it slides off the
s
tainless steel beater arm.
T
o clean the stainless steel beater arm simply remove the flexible wipers
and wash by hand in hot soapy water and dry thoroughly.
The flexible wipers should be cleaned immediately after use by
hand in hot soapy water. Use the cleaning brush supplied to clean
I
NSIDE each wiper. Rinse the flexible wipers under hot running
tap water and dry thoroughly.
To refit the flexible wipers, lubricate the stainless steel beater arms with
a small amount of fresh cooking oil. Slide the flexible wipers onto the
stainless steel arm. Ensure each wiper covers the full length of the arm
and is past the tip at the end. Repeat the process for the second wiper.
Note: the tool should only be used with both wipers fitted.
bowl, tools, splashguard
Wash by hand, then dry thoroughly or wash in the dishwasher.
Never use a wire brush, steel wool or bleach to clean your
stainless steel bowl. Use vinegar or a suitable descaler to remove limescale.
If food sticks or burns on the inside of the bowl, remove as much as possible
using the spatula provided. Fill the bowl with warm soapy water and allow to
soak. Remove any stubborn deposits using a nylon brush.
Any discolouration of the bowl will not affect its performance.
drain hole
Ensure this area is free from food. If necessary use a pipe cleaner
or cotton bud to clean.
temperature sensors
Wipe with a damp cloth then dry thoroughly. Never use abrasives or
sharp instruments to clean the sensors.
service and customer care
If the cord is damaged it must, for safety reasons, be replaced
by KENWOOD or an authorised KENWOOD repairer.
UK If you need help with:
using your machine
servicing or repairs (in or out of guarantee)
call KENWOOD Customer Care on 023 92392333.
Have your model number ready - it’s on the underside of the mixer.
spares and attachments
call 0870 2413653.
other countries
Contact the shop where you bought your machine.
Designed and engineered by Kenwood in the UK.
Made in China.
16
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KM070 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KM070 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KM070

Kenwood KM070 User Manual - German, Dutch, French, Italian, Portuguese, Spanish - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info