69106
6
Zoom out
Zoom in
Previous page
1/150
Next page
the mixing tools and some of their uses
beater
For making cakes, biscuits, pastry, icing, fillings, éclairs and
mashed potato.
whisk
For eggs, cream, batters, fatless sponges, meringues, cheesecakes,
mousses, soufflés. Don’t use the whisk for
heavy mixtures (eg creaming fat and sugar) - you could
damage it.
dough hook
For yeast mixtures.
to use your mixer
1Press down on the head release lever and raise the mixer
head until it locks into position.
to insert a tool 2 Select a tool and push into the tool socket .
Always ensure the guard is fitted onto the shaft of the dough
hook before inserting into the outlet. Once inserted fit the
guard to the mixer outlet to prevent food ingress.
3 Fit the bowl into the base and turn clockwise to lock into
position .
4Press down on the head release lever and lower the mixer head until
it locks into position.
5 Plug into the power supply then switch on and turn the speed
switch to the desired setting. To switch off turn to ‘0’.
Switch to pulse P for short bursts
6 Unplug from the power supply.
to remove a tool 7 Raise the mixer head and whilst holding it steady, pull the tool
from the outlet.
important
Some movement of the mixer head is normal when
mixing heavy loads such as bread dough.
If the mixer head is raised during operation, the machine will stop
working straight away. To re-start the mixer, lower the mixer head,
turn the speed switch to the off position, wait a few seconds and then
re-select the speed. The mixer should resume operating straight away.
If for any reason power to the mixer is interrrupted and the machine
stops working, turn the speed switch to the off position, wait a few
seconds and then re-select the speed. The mixer should resume
operating straight away.
The mixer will not operate unless all the outlet covers are correctly
fitted to the machine.
If you hear the machine labouring either switch off and remove
some of the mixture or increase the speed.
4
the mixer
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KM 264 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KM 264 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info